Datamax Allegro 2 manual Getting Started

Page 14

Getting Started

Pause Button: This button allows the operator to stop printing a run of labels and then restart the job by pressing the button again. Activation of the button will:

∙Stop the print mechanism when the label printing is complete.

∙Turn on the pause light.

∙Stop the label counter, but maintain the count balance.

∙Hold all data in memory.

Pressing the button a second time will:

∙Restart the Printer.

∙Print the balance of labels on the counter unless interrupted.

∙Turn ‘off’ the pause light.

Pause Light: The pause light will turn on if any of the

following occurs:

∙The pause button is pressed.

∙A print job is canceled with the stop/cancel button.

∙A fault occurs with the cutter or rewind option.

Stop/Cancel Button:This button allows the operator to stop and cancel a run of labels in the process of being printed and continue on to the next run in the Printer’s buffer.

Feed Button: Pressing this button causes the paper to automatically advance to the first print position of the next label. On a new size label, 0 - 2 labels may feed before registration occurs.

6

Allegro2

Image 14

Contents Allegro2 Operator’s Manual Part Number Revision A3 Agency Compliance and Approvals Page Important Safety Instructions Page Contents Maintenance Unpacking and Inspection Getting StartedIntroduction Location of Parts on Your Printer Mechanism Detail Rear View Tear- off Assembly Installation Tear Bar Assembly InstallationUsing the Printer Control Panel Buttons, Lights and SwitchesGetting Started Light SwitchPaper/Ribbon RibbonLabels Media InstallationInstallation Label Loading Instructions Ribbon Loading Instructions Ribbon LoadingAvailable Modules Using the Printer OptionsTo install a Memory Module Font ROM Modules OptionsCutter 256K and 512K RAM ModulesMedia Rewinder Peel and PresentPresent Sensor Getting Started Allegro2 Checking Voltage Selection Setting Up Your PrinterPower Up Self-Test Test Label Interface Cables Interfacing to the PrinterPart Number Description Connecting to a PC Sample InstallationsConnecting to a CRT Connecting to Your Minicomputer Connecting to Your Non-ASCII DeviceSwitch Settings Switch SettingsBaud Rate Setting the Baud RateBaud 9600 4800 2400 1200 300 Test Word LengthOther Switches Switch Settings and FunctionsProgramming Commands Immediate CommandsSystem-Level Commands Char Description FormatBatch, 1-Cutter Enable Label-Formatting Commands Description FormatSpecial Label-Formatting Commands 10 Font-Loading Commands Programming ExamplesExample line Setting Up Your Printer Allegro2 Creating Labels Using Internal Batch Software Connect Cables Check Link CRT SettingsPrinter Used With a Link CRT Function Default Settings Batch System InitializationVerify Setup, Power Up, and Load Media Menu Screens Formatting and Printing LabelsAvailable Fonts and Barcodes Function KeysLabel Name NEW Label Name ALT-P Screen Description Default Range Print ParametersOther Important Keys Create/Modify Label Screen Print Label Screen HeaderCreating Labels Using Internal Batch Software Sample Label Format Creating Labels Using Internal Batch Software Invalid Font Type Smooth Font Valid BH Ranges Smooth Font InformationNumber OUT of Range Creating Labels Using Internal Batch Software Not Enough Room for Field Data Lines Lhhhvvv Creating Labels Using Internal Batch Software Time and Date Information Format = Day number 1 = MondaySample PrintsPrint Label Screen Print Label ScreenCreating Labels Using Internal Batch Software System Maintenance Screen System Maintenance MenuMetric Reset PrinterCopy Module Print Test LabelQuick Reference Listing Create/Modify Label CommandsCommand Valid Inputs Key Function Print Parameters ALT-PSpecial Keys Troubleshooting Controlling Print Quality Direct-Thermal Stock Mechanical AdjustmentsAligning the Printhead Tag Stock or Stiff MediaPrinthead Alignment Ribbon Feed and Tracking Adjustments Printhead Alignment ProcedureLabel Stock Tracking Adjustment Fine Printhead Alignment Troubleshooting Allegro2 Adjusting Printhead Pressure and Support Printhead Mount AssemblyPrinter Does Not Print, or Prints Several Labels at once TroubleshootingUnacceptable Print Quality Skips Every Other Label Erratic PrintingRibbon Does Not Advance Unable to print in rotationPrints Light on the Right Side of the Label Printer fails to turn onDrive Roller MaintenanceInterior and Exterior Cleaning Schedule Area Method IntervalCleaning the Printhead Cleaning the PrintheadMaintenance Allegro2 Page Ascii Control Code Chart Appendix aMaintenance Allegro2 Char Hex Dec Page Table B-2 Word Length Appendix B Switch Settings and Cable InterfacingTable B-1 Baud Rate Table B-3 OptionsParamete Default Value Signal PinTable B-1 I/O Port Wiring Table B-2 Printer Default Communication ParametersFonts Appendix CAvailable Fonts and Barcodes Table C-1 Valid Human-Readable Font Ascii CharactersTable C-2 Font Sizes Font 6 62-character alphanumeric, uppercase Available Fonts and Barcodes Table C-3 Barcode Characteristics BarcodesHbic Barcode I Codabar Kmart NON EDI Uppercase R Error CodesLowercase Uppercase TAllegro2 Pin Description Appendix ETable E-1 Printer Interface Cables Table E-2 Printer Pin ConnectionsStraight Cable MXM PC DB25P to Printer ∙ Parallel to Serial Adapter Part Number Figure E-5 Centronics Parallel Interface ConverterAppendix F PrintingFonts BarcodesMedia Label MaterialLabel/Tag Media Specifications Table F-1 Media DimensionsCommunications Interfacing Lights, Buttons, Switch and POTLists of Approved Media ElectricalOptions EnvironmentalPhysical 256K Flash Eeprom Specifications Allegro2 Appendix G PrinterWarranty Service Procedures Thermal PrintheadGeneral Warranty Provisions Limitation of Liability