Datamax Allegro 2 manual Print Label Screen

Creating Labels Using Internal Batch Software

3.4 Print Label Screen

The Print Label Screen is used to print labels that have been formatted and/or modified in the Create/Modify Label Screen. From the Create/Modify Label Screen, press the F1 key to toggle to the Print Label Screen. The screen should look like this:

PRINT LABEL

MODULE NAME: ______________

LABEL NAME: ________________

QUANTITY: _______________

Figure 3-5 Print Label Screen

When viewing the Print Label Screen, the procedure for printing a label is as follows:

1.Enter the Label Name you want to print and press the return key. The cursor will move to the Quantity Position. If the Printer does not find the Label Name you entered, you will receive an error message and will need to re-enter the Label Name. When in the Label Name position, you can use the F2 key (LIST) to list all of the names available in the currently installed memory module.

2.Enter a number not more than four digits long to indicate the quantity of labels you wish to print and press the return key. The maximum number of labels per run is 9999.

3.Depending on how the label is set up, the cursor may move to the Initial Increment or Initial Decrement position if a consecutive number or letter was specified as a data type. Or, the cursor may move to a prompting position if a P was specified as a data type. Enter the

Allegro2 53