Citizen PPU-231 manual Serial Interface, Specifications

PPU-231 User’s Manual

7.SERIAL INTERFACE

7.1Specifications

(1)	Synchronous system			: Asynchronous
(2)	Baud rate			: 1,200, 2,400, 4,800, 9,600, 19,200 bps (Selected by the user)
(3)	1-word configuration
	Start bits			: 1 bit
	Data bits			: 8 bits or 7 bits (Setting upon shipment)
	Parity bits			: Odd, even, or no parity (Selected by the user)
	Stop bits			: 1 bit or more
(4)	Signal polarity
	RS-232C
	• Mark	=	Logic "1" (-3 ∼ -12 V)
	• Space	=	Logic "0" (+3 ∼ +12 V)
(5)	Received data (RXD signal)
	• Mark	=	1
	• Space	=	0
(6)	Reception control (DTR signal)
	• Mark	:	Data not transferable
	• Space	:	Data transferable
(7)	Transmission control (TXD signal)
	• DC1 code(11H) X-ON				:	Data receivable
	• DC3 code(13H) X-OFF				:	Data not receivable

7.2Connector's Pin Configuration

No.	Signal Name	Input/Output	Function
1	FG		Frame Ground
7	GND		Signal Ground
3	RXD	Input	Received Data
20	DTR	Output	Printer BUSY Signal
2	TXD	Output	Transmitted Data
6	DSR	Input	Data Set Ready

[Note] 1. The RS-232C signals are based on the EIA RS-232C.

2.The received data should be always maintained in the Mark status when no data is being transferred.

Applicable connectors (D-Sub connectors)

Printer side	:	17LE-13250 (Anphenol) or its equivalent
Cable side	:	17JE-23250 (Anphenol) or its equivalent

31 CITIZEN