Citizen PPU-231 manual ESC − n

PPU-231 User’s Manual

ESC − n

[Function]		Specifying/Canceling Underline
[Code]		<1B>H<2D>H<n>
[Range]		{0 ≤ n ≤ 02} data is described in Hex code.
[Outline]	Specifying/canceling an underline.
		•Types of underlines by n value are shown below:
		n (Hex)	Type
		0	Canceling an underline.
		1	Specifying an underline for 1-dot width.
		2	Specifying an underline for 2-dots width.
[Caution]	• An underline is attached to the full character width. It is, however, not attached to
		the part having been skipped by horizontal tab command.
	• An underline is not attached to a 90 °- right-turned characters.
	• Specification/cancellation with this command is invalid to Kanji.
[See Also]		ESC !, FS −
[Sample Program]
		LPRINT CHR$ (&H1B) + "−" + CHR$ (0) ;

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) + "−" + CHR$ (1) ;

LPRINT "AAAAA" + CHR$ (&HA) ;

[Print Results]

ESC 2

[Function]	Specifying 1/6-inch Line Feed Rate
[Code]	<1B>H<32>H
[Outline]	The line feed rate per line is specified by 1/6 inch.
[Sample Program]	[Print Results]
	LPRINT "AAAAA" + CHR$ (&HA) ;
	LPRINT CHR$ (&H1B) + "3" + CHR$ (0) ;
	LPRINT "AAAAA" + CHR$ (&HA) ;
	LPRINT CHR$ (&H1B) + "3" + CHR$ (50) ;
	LPRINT "AAAAA" + CHR$ (&HA) ;
	LPRINT CHR$ (&H1B) + "2" ;
	LPRINT "AAAAA" + CHR$ (&HA) ;
	LPRINT "AAAAA" ;
	LPRINT CHR$ (&H1B) + "J" + CHR$ (100) ;
	LPRINT "AAAAA" + CHR$ (&HA) ;
	LPRINT "AAAAA" + CHR$ (&HA) ;

49 CITIZEN