7.BUSY (Busy signal clear timing) [*Standard,
Selects the clear timing of Busy signal for parallel I/F. Standard: Clears after confirming the rise of STB signal.
8.Buffer
[*2k bytes, 72 bytes] Select buffer size.
*1: For ACK timing and Busy timing, only setting the parallel board is available.
4.7Paper-Near-End, Mechanical Alarm, Memory Error
(1)
Printing paper shortage is detected and informed with SEL lamp blinking at 0.5- second intervals, where printing is suspended. At this time, power supply to the motor and printing solenoid is stopped with BUSY signals output in the host computer. To recover from
(2)Mechanical alarm
On occurrence of locked motor, any kind of trouble in the mechanism is suspected. Power supply to the motor and printing solenoid is stopped and BUSY signals are output in the host computer. SEL lamp is then blinked at
(3)Memory error
This error is developed when any abnormality is detected by the
(4)Memory switch setting error
This error is developed when any abnormality is detected in the setting of memory switch when the equipment is powered on.
The alarm causes the POWER lamp to blink at
— 21 —