Citizen Systems iDP-3540, 3541 user manual IDP-3540/41 User’s Manual RS-422A type only Function

iDP-3540/41 User’s Manual

2) RS-422A type only

No.		Function				OFF			ON	Factory
										Setting
1	2						L		H	OFF
2	2	Printer address					L		H	OFF
3	2						L		H	OFF
4		-								OFF
5										OFF
6		Baud rate setting				Refer to the table below				ON
7										ON
8										OFF
bps	110		150	300	600	1200	2400	4800	9600
No.
5	OFF		ON	OFF	ON	OFF	ON	OFF	ON
6	OFF		OFF	ON	ON	OFF	OFF	ON	ON
7	OFF		OFF	OFF	OFF	ON	ON	ON	ON
8	OFF		OFF	OFF	OFF	OFF	OFF	OFF	OFF

11-3. Slide Switch Setting (Serial interface specifications only)

RS-232C or 20mA current loop can selected by changing slide switch SW1 on the control board. The side labeled “RS” is for RS-232C and the side labeled “CL” is for 20mA current loop.

The switch is set at the factor for RS-232C.

11-4. Dip-Switch Location

Power off and remove the printer cover before setting the Dip-Switches.

Notes: DS2 is mounted for Serial type and RS-422A type only.

CITIZEN 32/48