Citizen Systems 3541, iDP-3540 user manual Initial Setting

Page 43

iDP-3540/41 User’s Manual

13. Initial Setting

Followings are automatically set after Power-on.

(1)Printer head returns to its start position.

(2)SELECT (ON-LINE) or DESELECT (OFF-LINE) status may be chosen by the Dip Switches for Pre-Setting.

(3)Print buffer is cleared.

(4)Standard character mode is set.

(5)66 lines per page is set.

(6)The first line set at the present line.

(7)Designation of Red printing is cleared.

(8)For 7 bit data, character code SI is applied.

CITIZEN

43/48

Image 43

Contents User’s Manual EMC LVDImportant Safety Instructions Contents Slide Switch Setting Serial interface specifications only Introduction Basic Specifications Specifications Citizen Block Diagram External Appearance and parts Description 12/48 13/48 Preparation IDP-3540/41 User’s Manual Ribbon Cassette Installation 16/48 17/48 Input Buffer Back-up Input Buffer Back-up FunctionParallel Interface Data FaultACK 21/48 22/48 Serial Interface DTR TTL25/48 26/48 27/48 8V Busy TD Mark = -8V +8V Ready Space = +8V Current on Ready External Output Function Selection IDP-3540/41 User’s Manual RS-422A type only Function Print Control Functions SO0EH FF0CHSI0FH CR0DH LF0AHRS1EH 37/48 38/48 39/48 40/48 DEFAULT=20 42/48 Initial Setting General Cautions MaintenanceCharacter Code Tables IDP-3540/41 User’s Manual Individual Country Character Codes External Dimensions IDP-3540/41 User’s Manual Model iDP3541