Citizen Systems iDP-3540, 3541 user manual 38/48

iDP-3540/41 User’s Manual

Bit image mode printing is performed by this command. (n2 is the equotient when divided by 256, and n1 is the remainder.) When data is received only for numbers specified by n1 and n2, printing and line feed are carried out automatically, and the bit image mode is cancelled.

However, since “half-dots” are being used, the next corresponding pin cannot print at the same time.

Further, the maximum value of n1 and n2 is the number contained in one line, and this cannot be exceeded.

Relation of Head Pins to Data

12-2-13. 1/9 inch Line Feed Pitch Set Command (Graphic Type)

1st byte

D8								D1
	0	0	0	1	1	0	1	1

ESC (1B) H

2nd byte

D8								D1
	0	0	1	1	0	0	0	1

1(31)H

12-2-14. 2/9 inch Line Feed Set Command (Graphic Type)

1st byte

D8								D1
	0	0	0	1	1	0	1	1

ESC (1B) H

2nd byte

D8								D1
	0	0	0	1	0	0	0	1

2(32)H

CITIZEN 38/48