Citizen Systems iDP-562 user manual Important Safety Instructions, Citizen

Page 3

iDP-562 User’s Manual

IMPORTANT SAFETY INSTRUCTIONS

*Read all of these instructions and save them for future reference.

*Follow all warnings and instructions marked on the product.

*Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.

*Use a damp cloth for cleaning.

*Do not use this product near water.

*Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

*Slots and openings on the cabinet and the back or bottom are provided for ventilation.

To ensure reliable operation of the product and to protect it form overheating,

do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug of other similar surface.

This product should never be placed near or over a radiator or heat register.

This product should not be placed in a built-in installation unless proper ventilation is provided.

*This product should be operated from the type of power source indicated on the marking label. If you’re not sure of the type of power available, consult your dealer or local power company.

*Do not allow anything to rest on the power cord. Do not place this product where the cord will be walked on.

*If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord ampere rating.

Also, make sure that the total of all products plugged into the wall outlet dose not exceed 15 amperes.

*Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

*Except as explained elsewhere in this manual, don’t attempt to service this product yourself.

Opening and removing those covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks. Refer all servicing on those compartments to service personnel.

*Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power cord or plug is damaged or frayed

B.If liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

D.If the product dose not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

E.If the product has been dropped the cabinet has been damaged.

F.If the product exhibits a distinct change in performance, indicating a need for service.

CITIZEN

3

Image 3
Contents User’s Manual LVD EMCCITIZEN2 Citizen Important Safety InstructionsFCC Warning IDP-562 User’s Manual Contents Outline Basic Specifications Appearance and Parts Name Citizen Operation Citizen Citizen TTL Serial InterfaceCurrent Loop Space =OFF Data + LF + CR OFFData + CR OFF OFF Data + LF Data + CR + LFGND FaultCurrent TTL LoopCitizen Citizen 6CURRENT Loop Start BIT Data BIT + Parity BITStop BIT Citizen Citizen Data 3 Data 4 Data 5 Data 6 Data 7 Data Parallel InterfaceForeign character DSW-4 STB Twisted Pair GND Data ACK Busy Slct Fault ACK, BUSY, SLCT, STB, FaultPIN no LOW level Citizen Control Code CR0D ESC1B ESC81B Initial Setting Character Code Table Citizen SO Side Maintenance