4 Graphic Print Mode Designation
ESC(1B)
K(4B)
n1
n2
DATA
Input ESC K (1B 4B) at the top of the line and then input Graphic Print Data, which is converted to binary, into n1. After that, input dummy data in n2.
If it is also the Graphic Print in the next line, ESC K n1 n2 should be input once again before the data. The number for Graphic Print Data should be:
1 £ n1 £ 240
Any numbers other than the above comes to 240.
5 Graphic Print Data
Printing in seven lengthwise dots by 240 rows can be made in one line. The 7 lengthwise dots are input as the graphic print data. The data are computed as follows:
®The position as traced from the home position
Correspondence of head pin to graphic print data
As will be understood from the above, the data are used in which the first dot corresponds to the first bit and the 7th dot corresponds to the 7th bit. The 8th bit is disregarded. Try to select decimal data or hexadecimal data matching to the host computer.
CITIZEN | 29 |