3.2 Description on Each Part |
| |
1 | Power Plug | Insert this plug in the plug socket under the prescribed voltage. |
2 | Power Switch | As the power switch is turned on, initializing performance of the printer starts and |
|
| the print head returns to the left end (home position). |
3 | Power Lamp | The lamp lights up as power switch is on and turns off when the switch is off. |
4 | SEL Lamp | The lamp lights up when the printer is in a SELECT |
|
| is extinguished by DESELECT |
|
| The printing operation is maintained while this lamp keeps on lighting. |
5 | ALM Lamp | This lamp is turned on when the printer operation is out of normal condition. |
|
| When this ALARM state happens, printing and Line Feed operation is suspended. |
|
| For a release from an ALARM state, push SEL switch or turn off the power switch |
|
| once and turn on again. |
6 | LF Switch | Use this switch for paper feeding and line spacing when the printer is in |
|
| DESELECT state. |
7 | SEL Switch | When this switch is pressed, the printer enters SELECT |
|
| When pressed again, the printer enters DESELECT |
|
| This switch is also used when clearing an alarm condition. |
|
| And if this switch is pressed when printing, the printer enters DESELECT status, |
|
| after all the data in the buffer is printed. |
8 | Printer Cover | Set this cover correctly in place so that dusts and noise can be avoided. |
9 | Interface Connector | This is for connection with various personal computers by connecting cable. |
|
| Make sure that both your computer and printer are powered off before connecting |
|
| cable. |
CITIZEN | 9 |