Citizen Systems 500 user manual Paper Feed Selection Paper Source, Fanfold Paper Rear Tractor Mode

Paper Feed Selection - Paper Source

There are three settings on the paper feed selector level on the rear-left of the printer:

1 Rear Tractor Mode: Fanfold tractor pa- per from the rear tractor feeder unit.

2 Friction Feed Mode: Cut sheet paper from the top sheet guide

3 Bottom Tractor Mode: Fanfold tractor paper from the bottom tractor feeder unit.

English

Fanfold Paper (Rear Tractor Mode)

Turn the power on and the PAPER OUT indicator will flash indicating that no paper is installed in the printer.

Adjust the head gap lever for the thickness of paper that you are using, then set the paper feed selector to the rear tractor mode position.

Then lift off the top cover at the rear of the printer to expose the rear tractor guides

Unlock the tractors by pulling the tractor clamping le- vers (1) forward. Slide the tractors to accommodate the width of paper being used (2).

Lift the tractor covers (3) to expose the sprocket holes with the tractor pins

Align the paper on the sprocket holes then close the tractor covers

Adjust the tractors to remove any slack on the paper and then lock the tractor clamping levers once again.

13