Citizen Systems 500 Paper Specifications, Fanfold Paper, Continuous Labels, Single Sheet

Paper Specifications

It is recommended that paper which may be used with this unit is within the specification provided below.

Fanfold Paper

Width: 3 to 10 inches, 76.2 to 254 mm

To insure optimum print quality, 60-82.5 g/m2 is recommended for graphic printing. In multilay- ered paper with carbon, the carbon is equivalent to a sheet of paper.

When Bottom Feeding, the printer will handle multi-part forms up to 0.43 mm thick. Up to 6 copies of 53 g/m2 chemical release paper can be used.

When Rear Feeding, the printer will handle multi-part forms up to 0.36 mm thick. Up to 5 copies of 53 g/m2 chemical release paper can be used.

Continuous Labels

Width of the backing sheet:	76.2-254 mm
Thickness of the backing sheet:	0.07-0.09 mm
Total thickness:	0.16-0.19 mm
Label weight:	68 g/m2
Quality:	fine-quality paper
Label size:	63.5	mm minimum width
	23.8	mm minimum height

Use only labels mounted on continuous backing sheets in bottom tractor mode only. Depend- ing on the thickness of the label or a kind of the glue, some labels may not be usable.

Single Sheet

Width:	102 - 297 mm
Height:	127 - 363 mm
Weight:	52.5 - 90 g/m2

Paper should be within operating temperature and humidity ranges at least 24 hours prior to use. Due to letter head varying in paper weight and construction, we cannot guarantee print quality and paper handling for all types.

Envelopes

Since envelopes vary in size, paper weight and construction, print quality cannot be guaranteed for all types of envelopes.

To ensure good print quality, printing should not occur in areas where the edges overlap.

English

31