Citizen Systems 500 user manual Specifications Printer Specifications

Page 30

English

Chapter 7 - Specifications

Printer Specifications

Power requirements:	220 - 240 Volts AC, 50 - 60 Hz, 1.5 Amps
Interface:	Centronics parallel, RS-232C/Serial
Print fonts:	High speed draft, Draft, Roman, Sans Serif, Courier, Prestige,
	Script, Bold PS, Bar Code (Code 39, UPC A, UPC E, EAN 8, EAN
	13, Int 2 of 5, Code 128, PostNet)
Software emulation:	Epson FX-880, IBM Proprinter III,
	OKI MICROLINE 320 Turbo (without Scalable)
Buffer:	Selectable [0 KB / 8 KB / 32 KB (default) / 64 KB (max.)]
Character sets:	EPSON mode ONE Italic, 18 characters set tables, 17
	International characters and Legal Set
	IBM mode 18 character set tables
	OKI mode Line Graphics, Block Graphics, 18 character set
	tables, 17 International characters and Legal Set
Characters per line (max): Pica (10 cpi): 80 characters
	Elite (12 cpi): 96 characters
	Micron (15 cpi): 120 characters
	Compressed (17 cpi): 137 character
	Elite compressed (20 cpi) : 160 characters
Printing speed (cps):		15 cpi	12 cpi	10 cpi
	Draft	500	400	333
	Near Letter Quality	67	80	67
	High Speed Draft	-	475	396
Paper feed:	Push tractor feed (Rear and Bottom: user selectable) [with
	fanfold paper]
	Friction feed [with single sheets or envelopes]
Printing direction:	Uni-directional / Bi-directional (user selectable)
Line feed time:	Approx. 52 msec
Noise level:	Less than 58 dB (A) in Normal Mode NLQ
	Less than 56 dB (A) in Quiet Mode NLQ
Operating environment:	Temperature: 5°C to 40°C (41°F to 104°F)
	Humidity: 20% to 80% RH
Power consumption:	Max 190 W
	Stand by – 10 W
	Self Test – 70 W
Storage environment:	Temperature: -20°C to 60°C (-4°F to 140°F)
	Humidity: 10% to 90% RH
Printer MTBF	10,000 hours
Head service life:	Approx. 200 million strokes in DRAFT mode
Ribbon:	Endless fabric ribbon
Ribbon life:	Approx. 12 million characters (standard ribbon)
Detectors:	Paper out detector
	Printhead Overheat detector
	Overload detector
Dimensions:	450 (W) x 383 (D) x 184 (H) mm
Mass (Weight):	Approx. 8.5 kg

30

Image 30

Contents User’s Manual Contents Maintenance and Troubleshooting SpecificationsProduct Warranty OKIUser Safety Instructions Introduction About This Printer ManualWhat to do if you have problems For the latest informationInstallation and setup for first use Unpacking Installing the Platen KnobRear View Parts of the PrinterFront View Bottom ViewConnecting to a Computer Installing Ribbon Cassette Friction Feed Mode Paper Head Gap AdjustmentRear Tractor Mode Bottom Tractor ModeFanfold Paper Rear Tractor Mode Paper Feed Selection Paper SourceFanfold Paper Bottom Tractor Mode English Single Sheets and Envelopes Friction Mode Tearing Off Paper Control Panel Keys Selecting a Character FontHigh Speed Draft Mode Selecting a Character PitchTop Of Form Quiet ModeLine Feed / Form Feed LF/FF Micro Line Feed and Reverse Micro Line FeedSaving Top Of Form Paper Parking LOAD/PARKInitial Setup Mode Entering Initial Setup ModeFactory Initialisation English Interface Setup Mode Parallel and Serial Microsoft Windows IBM PCs Or CompatiblesChoosing a Suitable Emulation Windows 95 Driver Installation Windows 98 Driver InstallationManually Installing a Windows 95 or 98 Driver Windows NT4 Driver Installation Window NT4 Single User Windows NT4 in the Network EnvironmentMaintenance and Troubleshooting Printer Self Test Periodic MaintenanceTroubleshooting Guide Carriage stops moving, all indicators start blinking Printer does not power upPower is on but printer does not print Paper wrinkles when using tractor feedSpecifications Printer Specifications Continuous Labels Paper SpecificationsFanfold Paper Single SheetPrinting Area Fanfold Paper and Continuous LabelsSingle Sheet and Envelopes