Chaparral Chaparral FS 1310 manual Changing the Scan Delay, Select Set Date/Time and press Enter

Page 43

Configuring the Router

The Configuration Menu screen displays.

2Select Set Date/Time and press Enter.

The Set Date/Time screen displays.

3Select Set Time and press Enter. The Set Time screen displays.

4Enter the time you want and press Enter.

Enter the time in the following format: hh:mm:ss.

The system confirms that you want to make the change.

5Select Yes and press Enter to make the changes.

The system confirms that the changes are made.

6Press Enter to return to the Configuration Menu.

Changing the Scan Delay

You can control how long the router waits before scanning its channels for devices. You may want to change this setting if you have devices that take longer to come ready than the router.

To change the scan delay:

1From the System Menu, select Configuration Menu and press Enter. The Configuration Menu screen displays.

3-15

Image 43

Contents User’s Guide Page Copyright EMC Safety Page Contents Troubleshooting Reference Documents FS1310 Rack/Desktop Model User’s Guide Viii About This Guide IntroductionBold Chaparral FS1310 Router Benefits and FeaturesConventions ConventionAbout Serverless Backup Fibre Channel SpecificationsSpecification PhysicalSwitches IndicatorsEnvironmental FS1310 Rack/Desktop Model User’s Guide Unpacking the Router Installing the RouterTo unpack the router Installing on a Desktop Installing the RouterTo install the FS1310 on a desktop To install the router in a rack Installing in a RackSimple loop configuration example Installation Configuration ExamplesMultiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Connecting to the Scsi Channels Connecting the RouterTo connect devices to the Scsi channels Connecting to the Fibre Channel PortTo connect to the RS-232 port Connecting to the RS-232 PortTo connect to the Fibre Channel port Pin FunctionTo connect to the Ethernet port Powering Up All DevicesConnecting to the Ethernet Port To power up Scsi devicesDescription Color Function Label To make the host FC connectionSetting Default For more information, see Router Default SettingsAccessing the Router Administrator Software Configuring the RouterFS1310 Rack/Desktop Model User’s Guide Using the Ethernet Port for the First Time Accessing the Router Administrator Using the Ethernet PortAccessing the Router Software Using the Ethernet Port Do this Navigating the Router Administrator SoftwareTo access the network management system Select LAN Configuration and press EnterChanging the Screen Display Changing Router ConfigurationSelect Function To select the topology Selecting the TopologyChanging the Router’s Loop ID To change the Loop ID Changing the Router’s FC LUN Select Host Configuration and press EnterTo change the LUN This can be any number from 00 to To change the Scsi ID assigned to a router channel Changing the Scsi ID Assigned to Each Router ChannelDisabling the Termination on an HVD Router Select Channel Configuration and press EnterTo set the router’s date Setting the Date and TimeTo change the scan delay Changing the Scan DelaySelect Set Date/Time and press Enter Enabling and Disabling the Alarm Administrator Software on Alarm threshold What to do when the alarm soundsTo enable or disable the alarm Restoring the Default SettingsTo restore the default settings Select Restore Defaults and press Enter Rebooting the RouterTo reboot the router To change the mapping mode Changing the Mapping Mode Auto or FixedChanging and Displaying Device Information Changing Device Addresses FC LUNs Select Mapping Mode press EnterTo change the device FC LUNs See Changing the Mapping Mode Auto or Fixed onDisplaying the FC-to-SCSI Address Map Displaying the Devices Connected to the RouterTo display the devices connected to the router Displaying the Event Log Displaying Router InformationTo display the address map To display one event at a time To display a full page of events Select View Event Log and press EnterGroup Field What displays Displaying Hardware and Configuration InformationTo display hardware information only To display hardware and configuration information To display the router’s LUN Displaying the Router’s FC LUNSelect Display Address Map and press Enter Upgrading Firmware To upgrade the router’s firmwareUpgrading the Router’s Firmware FS1310 Rack/Desktop Model User’s Guide Upgrading the Ethernet Card’s Firmware To upgrade the Ethernet card’s firmwareFS1310 Rack/Desktop Model User’s Guide Problems During Bootup TroubleshootingChaparral Technical Support Lvds Bist Diagnostic Failure SolutionsTo restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port ProblemsSolution Device Scsi Channel ProblemsEvent Logs Using the Loader Diagnostics MenuUsing the Loader Utility Menu Router is Not RespondingSelect Capture Text Event Log File CaptureSetting Up Debug Logging Voltage and Temperature Errors and WarningsTo set up debug logging Address and Device Mapping Figure A-1. FS1310 device Loop ID Loop ID to Alpa MappingDecimal 108 109 110 Configuring the Router for TCP/IP LAN ConfigurationTo use ARP to resolve addresses in Windows Using Address Resolution ProtocolArp -s IP address 005013fx-xx-xx To discover which IP address was assigned to the router Configuring the Additional LAN SettingsDynamic Host Configuration Protocol Configuration To configure additional LAN settingsSelect Ethernet Config and press Enter System Configuration Screen TCP/IP Configuration Screen Snmp Configuration Screen System Information screen Standards Reference DocumentsSBP BooksGlossary FS1310 Rack/Desktop Model User’s Guide Glossary FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide TCP/IP FS1310 Rack/Desktop Model User’s Guide