Chaparral Chaparral FS 1310 manual LAN Configuration, Configuring the Router for TCP/IP

Page 75

B

LAN Configuration

Before you can access the Router Administrator software using the Ethernet port, you must set up your router for TCP/IP. The following sections describe the router’s TCP/IP setup.

A router that is part of a TCP/IP network requires three basic IP configuration elements: IP address, subnet mask, and default gateway IP address. The router’s IP address must be unique to the network in which the router resides. If the router is part of a publicly routed network (that is, attached to the Internet), the address must be globally unique.

This appendix describes how to configure the TCP/IP settings for the first time starting from the factory-set defaults.

Configuring the Router for TCP/IP

Before you can access the Router Administrator software, you must set the IP address and subnet mask for the controller. The default IP address is 10.0.0.1. You can do this one of four ways:

✁Setting up your computer with an IP address that is compatible with the controller default of 10.0.0.1, such as 10.0.0.42.

✁Using address resolution protocol (ARP) to set the address. See Using Address Resolution Protocol on page B-2.

✁Using Dynamic Host Configuration Protocol (DHCP) to set the address. See Dynamic Host Configuration Protocol Configuration on page B-3.

B-1

Page 74 Page 76
Image 75
Page 74 Page 76
Contents User’s Guide Page Copyright EMC Safety Page Contents Troubleshooting Reference Documents FS1310 Rack/Desktop Model User’s Guide Viii About This Guide IntroductionBold Chaparral FS1310 Router Benefits and FeaturesConventions ConventionAbout Serverless Backup Fibre Channel SpecificationsSpecification PhysicalIndicators SwitchesEnvironmental FS1310 Rack/Desktop Model User’s Guide Installing the Router Unpacking the RouterTo unpack the router Installing the Router Installing on a DesktopTo install the FS1310 on a desktop To install the router in a rack Installing in a RackSimple loop configuration example Installation Configuration ExamplesMultiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Connecting to the Scsi Channels Connecting the RouterTo connect devices to the Scsi channels Connecting to the Fibre Channel PortTo connect to the RS-232 port Connecting to the RS-232 PortTo connect to the Fibre Channel port Pin FunctionTo connect to the Ethernet port Powering Up All DevicesConnecting to the Ethernet Port To power up Scsi devicesDescription Color Function Label To make the host FC connectionSetting Default For more information, see Router Default SettingsAccessing the Router Administrator Software Configuring the RouterFS1310 Rack/Desktop Model User’s Guide Using the Ethernet Port for the First Time Accessing the Router Administrator Using the Ethernet PortAccessing the Router Software Using the Ethernet Port Do this Navigating the Router Administrator SoftwareTo access the network management system Select LAN Configuration and press EnterChanging Router Configuration Changing the Screen DisplaySelect Function To select the topology Selecting the TopologyChanging the Router’s Loop ID To change the Loop ID Select Host Configuration and press Enter Changing the Router’s FC LUNTo change the LUN This can be any number from 00 to To change the Scsi ID assigned to a router channel Changing the Scsi ID Assigned to Each Router ChannelDisabling the Termination on an HVD Router Select Channel Configuration and press EnterTo set the router’s date Setting the Date and TimeChanging the Scan Delay To change the scan delaySelect Set Date/Time and press Enter Enabling and Disabling the Alarm Administrator Software on Alarm threshold What to do when the alarm soundsRestoring the Default Settings To enable or disable the alarmTo restore the default settings Rebooting the Router Select Restore Defaults and press EnterTo reboot the router Changing the Mapping Mode Auto or Fixed To change the mapping modeChanging and Displaying Device Information Changing Device Addresses FC LUNs Select Mapping Mode press EnterTo change the device FC LUNs See Changing the Mapping Mode Auto or Fixed onDisplaying the Devices Connected to the Router Displaying the FC-to-SCSI Address MapTo display the devices connected to the router Displaying Router Information Displaying the Event LogTo display the address map To display one event at a time To display a full page of events Select View Event Log and press EnterGroup Field What displays Displaying Hardware and Configuration InformationTo display hardware information only To display hardware and configuration information Displaying the Router’s FC LUN To display the router’s LUNSelect Display Address Map and press Enter To upgrade the router’s firmware Upgrading FirmwareUpgrading the Router’s Firmware FS1310 Rack/Desktop Model User’s Guide Upgrading the Ethernet Card’s Firmware To upgrade the Ethernet card’s firmwareFS1310 Rack/Desktop Model User’s Guide Troubleshooting Problems During BootupChaparral Technical Support Lvds Bist Diagnostic Failure SolutionsTo restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port ProblemsSolution Device Scsi Channel ProblemsEvent Logs Using the Loader Diagnostics MenuUsing the Loader Utility Menu Router is Not RespondingSelect Capture Text Event Log File CaptureVoltage and Temperature Errors and Warnings Setting Up Debug LoggingTo set up debug logging Address and Device Mapping Figure A-1. FS1310 device Loop ID to Alpa Mapping Loop IDDecimal 108 109 110 Configuring the Router for TCP/IP LAN ConfigurationUsing Address Resolution Protocol To use ARP to resolve addresses in WindowsArp -s IP address 005013fx-xx-xx To discover which IP address was assigned to the router Configuring the Additional LAN SettingsDynamic Host Configuration Protocol Configuration To configure additional LAN settingsSelect Ethernet Config and press Enter System Configuration Screen TCP/IP Configuration Screen Snmp Configuration Screen System Information screen Standards Reference DocumentsSBP BooksGlossary FS1310 Rack/Desktop Model User’s Guide Glossary FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide TCP/IP FS1310 Rack/Desktop Model User’s Guide

Chaparral FS 1310 specifications

The Chaparral FS 1310 is a standout model in the world of recreational boating, specifically designed for those who appreciate both performance and comfort on the water. This versatile boat combines advanced engineering with innovative features, making it a popular choice among boating enthusiasts.

One of the most notable characteristics of the Chaparral FS 1310 is its sleek and modern hull design, which contributes to enhanced performance and stability. The deep-V hull allows for smooth navigation across varying water conditions, whether it be calm lakes or choppy seas. This design not only ensures a memorable ride but also provides safety and confidence for passengers.

The boat is equipped with powerful engine options that deliver impressive speed and acceleration. With options ranging from a robust outboard motor to a powerful inboard setup, the FS 1310 is designed to cater to the needs of different users, whether for leisurely family outings or exhilarating water sports. The engine compartment is thoughtfully arranged, allowing for easy maintenance and accessibility, which is crucial for boating enthusiasts.

Interior comfort is a significant focus in the Chaparral FS 1310. The spacious cockpit features ergonomic seating arrangements that prioritize passenger comfort. High-quality materials are used throughout, providing an upscale ambiance that appeals to a wide range of users. The helm is intuitively designed with easy-to-reach controls, ensuring that the captain can navigate effortlessly while keeping an eye on their surroundings.

Technologically, the Chaparral FS 1310 incorporates modern amenities such as a high-performance sound system and advanced navigation equipment. An integrated touchscreen display allows users to monitor engine performance, GPS mapping, and entertainment options, all in one place. Additionally, LED lighting throughout the interior and exterior enhances nighttime aesthetics and visibility.

For the adventurous, the FS 1310 is equipped with ample storage for water sports gear, making it an ideal choice for activities such as wakeboarding or fishing. The swim platform at the rear is spacious, allowing for safe and easy access to the water, which is a critical factor for families.

Overall, the Chaparral FS 1310 encapsulates what modern boating should be: a blend of performance, comfort, and technological innovation. With its array of features and characteristics, it stands out as a top-tier option for anyone looking to invest in a boat that promises unforgettable moments on the water.
Top Page Image Contents