FS1310 Rack/Desktop Model User’s Guide
| Changing the Scan Delay | |
| Enabling and Disabling the Alarm | |
| Restoring the Default Settings | |
| Rebooting the Router | |
| Changing and Displaying Device Information | |
| Changing the Mapping Mode (AUTO or FIXED) | |
| Changing Device Addresses (FC LUNs) | |
| Displaying the Devices Connected to the Router | |
| Displaying the | |
| Displaying Router Information | |
| Displaying the Event Log | |
| Displaying Hardware and Configuration Information | |
| Displaying the Router’s FC LUN | |
| Upgrading Firmware | |
| Upgrading the Router’s Firmware | |
| Upgrading the Ethernet Card’s Firmware | |
4 | Troubleshooting |
|
| Chaparral Technical Support | |
| Problems During Bootup | |
| Restoring the Default Configuration Through the Flash Utility | |
| Terminal Emulator and COM Port Problems | |
| Device SCSI Channel Problems | |
| Router is Not Responding | |
| Using the Loader Diagnostics Menu | |
| Using the Loader Utility Menu | |
| Event Logs | |
| Event Log File Capture | |
| Voltage and Temperature Errors and Warnings | |
| Setting Up Debug Logging |
AAddress and Device Mapping
| Loop ID to AL_PA Mapping | |
B | LAN Configuration |
|
| Configuring the Router for TCP/IP | |
| Using Address Resolution Protocol | |
| Dynamic Host Configuration Protocol Configuration | |
| Configuring the Additional LAN Settings |
vi