Chaparral Chaparral FS 1310 manual To display hardware and configuration information

Page 57

Configuring the Router

To display hardware and configuration information:

1From anywhere in the Router Administrator software, press Ctrl-e.

The first screen of events from the event log displays.

2Press Ctrl-eagain

The Hardware Information screen displays.

3Press Ctrl-eagain.

The Configuration Information screen displays.

4Press Esc to return to where you started from.

3-29

Image 57

Contents User’s Guide Page Copyright EMC Safety Page Contents Troubleshooting Reference Documents FS1310 Rack/Desktop Model User’s Guide Viii About This Guide IntroductionConventions Chaparral FS1310 Router Benefits and FeaturesConvention BoldAbout Serverless Backup Specification SpecificationsPhysical Fibre ChannelIndicators SwitchesEnvironmental FS1310 Rack/Desktop Model User’s Guide Installing the Router Unpacking the RouterTo unpack the router Installing the Router Installing on a DesktopTo install the FS1310 on a desktop To install the router in a rack Installing in a RackSimple loop configuration example Installation Configuration ExamplesMultiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Connecting to the Scsi Channels Connecting the RouterTo connect devices to the Scsi channels Connecting to the Fibre Channel PortTo connect to the Fibre Channel port Connecting to the RS-232 PortPin Function To connect to the RS-232 portConnecting to the Ethernet Port Powering Up All DevicesTo power up Scsi devices To connect to the Ethernet portDescription Color Function Label To make the host FC connectionSetting Default For more information, see Router Default SettingsAccessing the Router Administrator Software Configuring the RouterFS1310 Rack/Desktop Model User’s Guide Using the Ethernet Port for the First Time Accessing the Router Administrator Using the Ethernet PortAccessing the Router Software Using the Ethernet Port To access the network management system Navigating the Router Administrator SoftwareSelect LAN Configuration and press Enter Do thisChanging Router Configuration Changing the Screen DisplaySelect Function To select the topology Selecting the TopologyChanging the Router’s Loop ID To change the Loop ID Select Host Configuration and press Enter Changing the Router’s FC LUNTo change the LUN This can be any number from 00 to To change the Scsi ID assigned to a router channel Changing the Scsi ID Assigned to Each Router ChannelDisabling the Termination on an HVD Router Select Channel Configuration and press EnterTo set the router’s date Setting the Date and TimeChanging the Scan Delay To change the scan delaySelect Set Date/Time and press Enter Enabling and Disabling the Alarm Administrator Software on Alarm threshold What to do when the alarm soundsRestoring the Default Settings To enable or disable the alarmTo restore the default settings Rebooting the Router Select Restore Defaults and press EnterTo reboot the router Changing the Mapping Mode Auto or Fixed To change the mapping modeChanging and Displaying Device Information Changing Device Addresses FC LUNs Select Mapping Mode press EnterTo change the device FC LUNs See Changing the Mapping Mode Auto or Fixed onDisplaying the Devices Connected to the Router Displaying the FC-to-SCSI Address MapTo display the devices connected to the router Displaying Router Information Displaying the Event LogTo display the address map To display one event at a time To display a full page of events Select View Event Log and press EnterGroup Field What displays Displaying Hardware and Configuration InformationTo display hardware information only To display hardware and configuration information Displaying the Router’s FC LUN To display the router’s LUNSelect Display Address Map and press Enter To upgrade the router’s firmware Upgrading FirmwareUpgrading the Router’s Firmware FS1310 Rack/Desktop Model User’s Guide Upgrading the Ethernet Card’s Firmware To upgrade the Ethernet card’s firmwareFS1310 Rack/Desktop Model User’s Guide Troubleshooting Problems During BootupChaparral Technical Support Lvds Bist Diagnostic Failure SolutionsTo restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port ProblemsSolution Device Scsi Channel ProblemsUsing the Loader Utility Menu Using the Loader Diagnostics MenuRouter is Not Responding Event LogsSelect Capture Text Event Log File CaptureVoltage and Temperature Errors and Warnings Setting Up Debug LoggingTo set up debug logging Address and Device Mapping Figure A-1. FS1310 device Loop ID to Alpa Mapping Loop IDDecimal 108 109 110 Configuring the Router for TCP/IP LAN ConfigurationUsing Address Resolution Protocol To use ARP to resolve addresses in WindowsArp -s IP address 005013fx-xx-xx Dynamic Host Configuration Protocol Configuration Configuring the Additional LAN SettingsTo configure additional LAN settings To discover which IP address was assigned to the routerSelect Ethernet Config and press Enter System Configuration Screen TCP/IP Configuration Screen Snmp Configuration Screen System Information screen Standards Reference DocumentsSBP BooksGlossary FS1310 Rack/Desktop Model User’s Guide Glossary FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide TCP/IP FS1310 Rack/Desktop Model User’s Guide