Chaparral Chaparral FS 1310 Changing Device Addresses FC LUNs, Select Mapping Mode press Enter

Page 49

Configuring the Router

2Select Mapping Mode press Enter.

The Mapping Mode screen displays. The current setting is marked with an * next to it.

3Select the option you want and press Enter:

AUTO—lets the router assign the FC LUN to each device anytime you power up the router.

FIXED—tells the router to keep the same FC LUN as currently assigned for each device. This reserves the same FC LUN for each device, even when you power down and power up the router. The router retains the FC LUN, even if the device is no longer connected.

The system confirms that the changes are made.

4Press Enter to return to the Address Mapping screen.

Changing Device Addresses (FC LUNs)

You can change the FC LUN for any device connected to the router. You can only change the FC LUNs when the address mapping mode is set to FIXED. As long as you stay in FIXED mode, all FC LUNs you change will be retained even if the device or router is powered off and back on or if the device is removed and reconnected.

You can set the FC LUN for devices to any number between 00 and 63 by selecting the FC LUN that you want the device to map to. You cannot select the same FC LUN as the router’s LUN.

When in FIXED mode, the router will discover any new devices or existing devices that were removed and reconnected to a different location. These newly discovered devices will be in AUTO mode and will be assigned an FC LUN by the router. You can change these FC LUNs by following the steps below.

If you assign an FC LUN that is already in use, the FC LUNs for the two devices are swapped. For example, if device A has LUN 01 and device B has LUN 03, and you assign 03 to device A, the LUN for device B becomes 01.

For additional information about address mapping, see Appendix A, Address and Device Mapping.

3-21

Page 48 Page 50
Image 49
Page 48 Page 50
Contents User’s Guide Page Copyright EMC Safety Page Contents Troubleshooting Reference Documents FS1310 Rack/Desktop Model User’s Guide Viii About This Guide IntroductionConventions Chaparral FS1310 Router Benefits and FeaturesConvention BoldAbout Serverless Backup Specification SpecificationsPhysical Fibre ChannelSwitches IndicatorsEnvironmental FS1310 Rack/Desktop Model User’s Guide Unpacking the Router Installing the RouterTo unpack the router Installing on a Desktop Installing the RouterTo install the FS1310 on a desktop To install the router in a rack Installing in a RackSimple loop configuration example Installation Configuration ExamplesMultiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Connecting to the Scsi Channels Connecting the RouterTo connect devices to the Scsi channels Connecting to the Fibre Channel PortTo connect to the Fibre Channel port Connecting to the RS-232 PortPin Function To connect to the RS-232 portConnecting to the Ethernet Port Powering Up All DevicesTo power up Scsi devices To connect to the Ethernet portDescription Color Function Label To make the host FC connectionSetting Default For more information, see Router Default SettingsAccessing the Router Administrator Software Configuring the RouterFS1310 Rack/Desktop Model User’s Guide Using the Ethernet Port for the First Time Accessing the Router Administrator Using the Ethernet PortAccessing the Router Software Using the Ethernet Port To access the network management system Navigating the Router Administrator SoftwareSelect LAN Configuration and press Enter Do thisChanging the Screen Display Changing Router ConfigurationSelect Function To select the topology Selecting the TopologyChanging the Router’s Loop ID To change the Loop ID Changing the Router’s FC LUN Select Host Configuration and press EnterTo change the LUN This can be any number from 00 to To change the Scsi ID assigned to a router channel Changing the Scsi ID Assigned to Each Router ChannelDisabling the Termination on an HVD Router Select Channel Configuration and press EnterTo set the router’s date Setting the Date and TimeTo change the scan delay Changing the Scan DelaySelect Set Date/Time and press Enter Enabling and Disabling the Alarm Administrator Software on Alarm threshold What to do when the alarm soundsTo enable or disable the alarm Restoring the Default SettingsTo restore the default settings Select Restore Defaults and press Enter Rebooting the RouterTo reboot the router To change the mapping mode Changing the Mapping Mode Auto or FixedChanging and Displaying Device Information Changing Device Addresses FC LUNs Select Mapping Mode press EnterTo change the device FC LUNs See Changing the Mapping Mode Auto or Fixed onDisplaying the FC-to-SCSI Address Map Displaying the Devices Connected to the RouterTo display the devices connected to the router Displaying the Event Log Displaying Router InformationTo display the address map To display one event at a time To display a full page of events Select View Event Log and press EnterGroup Field What displays Displaying Hardware and Configuration InformationTo display hardware information only To display hardware and configuration information To display the router’s LUN Displaying the Router’s FC LUNSelect Display Address Map and press Enter Upgrading Firmware To upgrade the router’s firmwareUpgrading the Router’s Firmware FS1310 Rack/Desktop Model User’s Guide Upgrading the Ethernet Card’s Firmware To upgrade the Ethernet card’s firmwareFS1310 Rack/Desktop Model User’s Guide Problems During Bootup TroubleshootingChaparral Technical Support Lvds Bist Diagnostic Failure SolutionsTo restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port ProblemsSolution Device Scsi Channel ProblemsUsing the Loader Utility Menu Using the Loader Diagnostics MenuRouter is Not Responding Event LogsSelect Capture Text Event Log File CaptureSetting Up Debug Logging Voltage and Temperature Errors and WarningsTo set up debug logging Address and Device Mapping Figure A-1. FS1310 device Loop ID Loop ID to Alpa MappingDecimal 108 109 110 Configuring the Router for TCP/IP LAN ConfigurationTo use ARP to resolve addresses in Windows Using Address Resolution ProtocolArp -s IP address 005013fx-xx-xx Dynamic Host Configuration Protocol Configuration Configuring the Additional LAN SettingsTo configure additional LAN settings To discover which IP address was assigned to the routerSelect Ethernet Config and press Enter System Configuration Screen TCP/IP Configuration Screen Snmp Configuration Screen System Information screen Standards Reference DocumentsSBP BooksGlossary FS1310 Rack/Desktop Model User’s Guide Glossary FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide Index FS1310 Rack/Desktop Model User’s Guide TCP/IP FS1310 Rack/Desktop Model User’s Guide

Chaparral FS 1310 specifications

The Chaparral FS 1310 is a standout model in the world of recreational boating, specifically designed for those who appreciate both performance and comfort on the water. This versatile boat combines advanced engineering with innovative features, making it a popular choice among boating enthusiasts.

One of the most notable characteristics of the Chaparral FS 1310 is its sleek and modern hull design, which contributes to enhanced performance and stability. The deep-V hull allows for smooth navigation across varying water conditions, whether it be calm lakes or choppy seas. This design not only ensures a memorable ride but also provides safety and confidence for passengers.

The boat is equipped with powerful engine options that deliver impressive speed and acceleration. With options ranging from a robust outboard motor to a powerful inboard setup, the FS 1310 is designed to cater to the needs of different users, whether for leisurely family outings or exhilarating water sports. The engine compartment is thoughtfully arranged, allowing for easy maintenance and accessibility, which is crucial for boating enthusiasts.

Interior comfort is a significant focus in the Chaparral FS 1310. The spacious cockpit features ergonomic seating arrangements that prioritize passenger comfort. High-quality materials are used throughout, providing an upscale ambiance that appeals to a wide range of users. The helm is intuitively designed with easy-to-reach controls, ensuring that the captain can navigate effortlessly while keeping an eye on their surroundings.

Technologically, the Chaparral FS 1310 incorporates modern amenities such as a high-performance sound system and advanced navigation equipment. An integrated touchscreen display allows users to monitor engine performance, GPS mapping, and entertainment options, all in one place. Additionally, LED lighting throughout the interior and exterior enhances nighttime aesthetics and visibility.

For the adventurous, the FS 1310 is equipped with ample storage for water sports gear, making it an ideal choice for activities such as wakeboarding or fishing. The swim platform at the rear is spacious, allowing for safe and easy access to the water, which is a critical factor for families.

Overall, the Chaparral FS 1310 encapsulates what modern boating should be: a blend of performance, comfort, and technological innovation. With its array of features and characteristics, it stands out as a top-tier option for anyone looking to invest in a boat that promises unforgettable moments on the water.
Top Page Image Contents