Campbell Hausfeld SN528K specifications Limited Warranty

Page 6

Operating Instructions

Model SN258K

Troubleshooting Guide (Continued)

Problem

Stapler runs slow or has loss of power.

Cause

Solution

Stapler not lubricated sufficiently

Lubricate stapler

Broken spring in cylinder cap

Replace spring

Exhaust port in cap is blocked

Replace damaged internal parts

Staples are jammed in stapler.

Guide on driver is worn

Replace guide

 

Staples are not correct size

Use only recommended staples

 

Staples are bent

Replace with undamaged staples

 

Magazine or nose screws are loose

Tighten screws

 

Driver is damaged

Replace driver

 

Staples loaded incorrectly

Review Loading/Unloading section in

 

 

this manual

 

 

 

Air leaking at trigger valve

O-rings or seals are damaged

Replace o-rings or seals

stem.

 

 

Limited Warranty

1.DURATION: From the date of purchase by the original purchaser as follows: Standard Duty Products - One Year, Serious Duty Products - Two Years, Extreme Duty Products - Three Years.

2.WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive,

Harrison, Ohio, 45030, Telephone: (800) 543-6400

3.WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld product.

4.WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun, infla- tor or air accessory supplied or manufactured by Warrantor.

5.WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the duration of the warranty period.

6.WHAT IS NOT COVERED UNDER THIS WARRANTY:

A.Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial, industrial or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Some States do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

B.ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclu- sion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

C.Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or failure to operate products in accordance with instructions shall also include the removal or alteration of any safety devices. If such safety devices are removed or altered, this warranty is void.

D.Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E.Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields, driver blades, fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants, mate- rial hoses, filter elements, motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters, collets, chucks, rivet jaws, screw driver bits, sanding pads, back-up pads, impact mechanism, or any other expendable part not specifically listed. These items will only be covered for ninety (90) days from date of original purchase. Underlined items are warranted for defects in material and workmanship only.

7.RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or com- ponents which are defective, have malfunctioned and/or failed to conform within duration of the warranty period.

8.RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A.Provide dated proof of purchase and maintenance records.

B.Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service Center. Freight costs, if any, must be borne by the purchaser.

C.Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).

9.WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights. You may also have other rights which vary from state to state or country to country.

www.chpower.com

6

Image 6
Contents Description Table of ContentsGeneral Safety Information Model SN258KStapler Components And Specifications AIR Inlet 1/4 NPTMagazine Capacity Lubrication Operating StaplerRecommended Hookup Recommended HookupSequential Trip Safety Mechanism OperatingStapler Technical Support Limited Warranty Modèle SN258K Table des MatièresGénéralités sur la Sécurité Proposition 65 Cali ForniePièces Détachées et Spécifications de l’Agrafeuse Généralités sur la Sécurité SuiteModèle SN258K Capacité DU ChargeurBranchement Recommandé Utilisation de l’AgrafeuseGraissage Utilisation de ’Agrafeuse Suite Mécanisme De Sécurité À Déclenchement SéquentielGarantie Limitée Informaciones Generales de Seguridad ÍndiceDescripción Advertencia LaexposiAdvertencia indica Componentes y Especificaciones de la GrapadoraContinuación Cómo usar la gra- padora Conexión RecomendadaLubricacion Cómo usar la gra Mecanismo de Seguridad del Disparo SecuencialPadora Continuación Para reparar la herramienta Servicio TécnicoSujetadores y Piezas de Repuesto Para colocarle los sellos