BT 50e To send a fax at a pre-set time delayed faxing, To change the details of a pre-set fax

PaperJet 50e User Guide_se 10-06-2003 10:08 Pagina 19

To send a fax at a pre-set time (delayed faxing)

You can set your PaperJet 50E to send a fax at a specific time in order to take advantage of cheaper call rates or to allow for different time zones.

Place document face down in the document feeder.

If necessary set the Contrast and

Resolution settings.

Press until the display shows DELAYED TX

Press the Start button.

Display shows TYPE TIME

HH:MM

If using the 12 hour clock, press the Function button to switch between a for AM and p for PM.

Press the < > buttons to move the cursor.

/ Enter the time at which you want your fax to be sent, e.g. 18.30.

Display shows TYPE FAX NUMBER

1 2 3 Enter the number you want.

Press to confirm. Display shows the time at which the fax is due to be sent

AUTOMATIC RX

TX AT 18:30

NOTE

To cancel your pre-set fax transmission, press

the Stop button or remove the document from the document feeder.

If you want to store the document in memory for delayed faxing, see “To fax from memory” on page 20.

To change the details of a pre-set fax

You can set a new time and fax number.

Press until the display shows DELAYED TX Display shows ALREADY ENTERED Display shows CHANGE PARAM?

Either

Press to display CANCEL SETTING

To confirm. The fax is cancelled and your machine returns to standby.

	Or
	Display shows TYPE		TIME
/	Enter the new time at which you want your
	fax to be sent, e.g. 19.00
	Display shows TYPE		FAX NUMBER
	Press to confirm. Display shows
	AUTOMATIC	RX
	TX AT	19.00

19