American Megatrends MAN-772 manual Disabled

Page 55

Advanced Setup, Continued

External Cache Set this option to Enabled to enable L2 secondary (external) cache memory. The settings are Enabled or Disabled. The Optimal default setting is Enabled. The Fail-Safe default setting is Disabled.

Caching Controller Set this option to Yes if a cache controller is installed in the computer.

Setting

Description

 

Absent

To comply with the PCI specifications, PCI adapter cards

 

(the

must be reset every time the CPU is reset. When the end

 

default

user forces a soft reset by pressing <Ctrl> <Alt> <Del>, only

 

setting)

the CPU is reset. When this option is set to No, all soft

 

 

 

resets are converted to hard resets, and all PCI adapter cards

 

 

 

are reset when the CPU is reset.

 

Present

Soft resets still behave like soft resets when Yes is selected.

 

 

 

Select this option if a caching controller is installed in the

 

 

 

computer. Soft resets must not generate a hard reset if a

 

 

 

caching controller is used. If a hard reset is generated, a PCI

 

 

 

caching controller card cannot flush data from cache memory

 

 

 

to a hard disk drive before the reset.

 

 

 

 

 

Video Shadow C000,32K This option controls the location of the contents of video ROM. The settings are:

Setting

Description

Shadow

The contents of the video ROM area (C0000h - C7FFFh) are written to the

 

corresponding address in RAM.

Cached

The contents of the video ROM area (C0000h - C7FFFh) are written to the

 

corresponding RAM address and may be read from or written to cache

 

memory.

Disabled

The video ROM is not copied to RAM. The contents of the video ROM

 

cannot be read from or written to cache memory.

The Optimal default setting is Cached. The Fail-Safe default setting is

Disabled.

Shadow C800,16K

Shadow CC00,16K

Shadow D000,16K

Shadow D400,16K

Shadow D800,16K

Shadow DC00,16K These options enable shadowing of the contents of the ROM area in the option title.

Setting

Description

Shadow

The contents of the ROM area are written to the corresponding address in

 

RAM for faster execution.

Cached

The contents of the ROM area are written to the corresponding RAM

 

address and can be read from or written to cache memory.

Disabled

The ROM is not copied to RAM. The contents of the video ROM cannot be

 

read from or written to cache memory.

The Optimal and Fail-Safe settings are Disabled.

Chapter 2 WINBIOS Setup

51

Image 55
Contents Apollo IV Pentium PCI ISA MotherboardGuide Ii Apollo IV PCI Pentium ISA Motherboard User’s Guide Preface Phone Number CharacteristicsTechnical Support Static Electricity Packing ListCPU Manufacturer Supported CPU Speeds OverviewChipset Type of System Supported System Memory Socket Overview Parallel Port Fast ATAUltra DMA/33 FloppyCPU External Clock Frequency PCI Expansion Slot Frequency MouseInfrared DMIMotherboard Height Restrictions Apollo IV DimensionsStep Action Installation StepsApollo IV Motherboard Layout Step Action Unpack the MotherboardSet Jumpers PWR1 Setting DescriptionFlash ROM Type Avoid Static ElectricityExternal Configure CPUP54C P55C ForP54C Summary of Jumper Setting for Intel Pentium CPUsSummary of Jumper Setting for AMD K5 and K6 CPUs Value Description AMD-K6 Step Action Total System Install MemorySupported System Memory Configurations Type of System Memory Supported System Memory SocketMemory Display Should supply these parts Install the MotherboardInstall Motherboard Attach Cables ConnectorAttach Cables Pin Description Power Connector PinoutPin MotherboardPin Description Connector Signal Descriptions Pins 12 13 14Connect Onboard I/O Pin Description Signal DescriptionSLCTIN# Pin Signal DescriptionAttach Floppy Drive Twist in Floppy Cable Floppy Connector PinoutPin Use Attach IDE Drive Attach IDE Drive Primary Pinout The Primary IDE pinout is Secondary IDE Pinout The Secondary pinout is Test and Configure Page Winbios Setup Using the Keyboard with Winbios Setup Using a Mouse with Winbios SetupKeystroke Action Winbios Setup Menu Drive Type How to Configure Standard SetupParameter Description 65535 1223 152 MB Hard Disk Drive TypesSetting Description Advanced SetupAdvanced Setup Type of Armd Device Drive Emulation Configured Advanced Setup Disabled Chipset Setup Power Management Setup Power Management Setup Cont’d PCI/PnP SetupSnoop Bit Action DMA Channel Option Optimal Default Fail-Safe DefaultOffboard PCI IDE Primary IRQ Peripheral SetupPrimary Prefetch IDE Secondary IRQ optionsPeripheral Setup EPP Version Setting DescriptionSecurity Amibios Password SupportChanging a Password Setting a PasswordAnti-Virus Utility Optimal OriginalFail-Safe Programming the Flash Eprom Programming the Flash ROMStep Expected behavior Programming the Flash ROMNumber of Beeps Description Code Description Bootblock Code Checkpoint Codes