American Megatrends MAN-772 manual Attach Cables, Connector

Page 29

Step 6 Attach Cables

Connectors The Apollo IV motherboard includes many connectors. Connection instructions, illustrations of connectors, and pinouts are:

Connector

Power supply connector

Keyboard connector

Mouse connector

CPU Fan

Chassis Fan

Infrared

Remote Power connector

USB connectors

Speaker

IDE LED

Remote Power Switch

Hardware Reset Switch

Power LED (lit when power is on)

Keyboard Lock

Turbo LED (lit when high speed is active)

Suspend Mode Switch

Suspend LED (lit when system in suspend mode)

Serial Port

Parallel port

Floppy drive connector

IDE drive connectors

Cable Connector Ends When connecting chassis connectors to the motherboard, make sure to connect the correct connector end. Most connector wires are color-coded. Match the color of the wires leaving the switch or LED to the same pin on the connector end. There may be more than one connector with the same color- coded wires. If so, follow the wire to the switch or LED. Pin 1 is indicated by a white line. Pin 1 is always nearest the white line.

3 2 1

Cont’d

Chapter 1 Hardware Installation

25

Image 29

Contents Apollo IV Pentium PCI ISA MotherboardGuide Ii Apollo IV PCI Pentium ISA Motherboard User’s Guide Technical Support Phone Number CharacteristicsPreface Static Electricity Packing ListCPU Manufacturer Supported CPU Speeds OverviewChipset Type of System Supported System Memory Socket Overview Ultra DMA/33 Fast ATAFloppy Parallel PortCPU External Clock Frequency PCI Expansion Slot Frequency MouseInfrared DMIMotherboard Height Restrictions Apollo IV DimensionsStep Action Installation StepsApollo IV Motherboard Layout Step Action Unpack the MotherboardSet Jumpers PWR1 Setting DescriptionFlash ROM Type Avoid Static ElectricityExternal Configure CPUP54C P55C ForP54C Summary of Jumper Setting for Intel Pentium CPUsSummary of Jumper Setting for AMD K5 and K6 CPUs Value Description AMD-K6 Step Action Supported System Memory Configurations Install MemoryType of System Memory Supported System Memory Socket Total SystemMemory Display Should supply these parts Install the MotherboardInstall Motherboard Attach Cables ConnectorAttach Cables Pin Description Power Connector PinoutPin MotherboardPin Description Connector Signal Descriptions Pins 12 13 14Connect Onboard I/O Pin Description Signal DescriptionSLCTIN# Pin Signal DescriptionAttach Floppy Drive Pin Use Floppy Connector PinoutTwist in Floppy Cable Attach IDE Drive Attach IDE Drive Primary Pinout The Primary IDE pinout is Secondary IDE Pinout The Secondary pinout is Test and Configure Page Winbios Setup Keystroke Action Using a Mouse with Winbios SetupUsing the Keyboard with Winbios Setup Winbios Setup Menu Drive Type How to Configure Standard SetupParameter Description 65535 1223 152 MB Hard Disk Drive TypesSetting Description Advanced SetupAdvanced Setup Type of Armd Device Drive Emulation Configured Advanced Setup Disabled Chipset Setup Power Management Setup Power Management Setup Snoop Bit Action PCI/PnP SetupCont’d DMA Channel Option Optimal Default Fail-Safe DefaultPrimary Prefetch Peripheral SetupIDE Secondary IRQ options Offboard PCI IDE Primary IRQPeripheral Setup EPP Version Setting DescriptionSecurity Amibios Password SupportChanging a Password Setting a PasswordAnti-Virus Utility Fail-Safe OriginalOptimal Programming the Flash Eprom Programming the Flash ROMStep Expected behavior Programming the Flash ROMNumber of Beeps Description Code Description Bootblock Code Checkpoint Codes