American Megatrends MAN-772 manual Type of Armd Device Drive Emulation Configured

Advanced Setup, Continued

Floppy Drive Swap Set this option to Enabled to permit drives A: and B: to be swapped. The settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are Disabled.

Floppy Access Control This option specifies the read/write access that is set when booting from a floppy drive. The settings are Read/Write or Read-Only.The Optimal and Fail-Safe default settings are Read/Write.

Hard Disk Access Control This option specifies the read/write access that is set when booting from a hard disk drive. The settings are Read/Write or Read-Only.The Optimal and Fail-Safe default settings are Read/Write.

S.M.A.R.T. For Hard Disks Set this option to Enabled to permit AMIBIOS to use the SMART (Self Monitoring Analysis and Reporting Technology) protocol for reporting server system information over a network. The settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are Disabled.

Primary Master ARMD Emulator As

Primary Slave ARMD Emulator As

Secondary Master ARMD Emulator As

Secondary Slave ARMD Emulator As These options specify the type of standard PC drive that an ARMD drive will use when attached as a master or slave to the specified IDE channel. The settings are Auto (AMIBIOS automatically determines the correct type of drive emulation), Floppy, or Hard Disk. The Optimal and Fail-Safe default settings are Auto.

If Auto is selected, AMIBIOS configures ARMD drives as follows:

Type of ARMD Device	Drive Emulation Configured
LS120	Floppy
Iomega Zip drive	Hard Disk
Magneto-Optical drive	Hard Disk

Cont’d

Chapter 2 WINBIOS Setup 49