American Megatrends MAN-772 manual Standard Setup, Drive Type How to Configure

Page 48

Section 1 Setup

Standard Setup

Standard Setup options are displayed by choosing the Standard icon from the WINBIOS Setup main menu. All Standard Setup options are described in this section.

Date/Time Select the Standard option. Select the Date and Time icon. The current values for each category are displayed. Enter new values through the keyboard.

Floppy Drive A: and B: Move the cursor to these fields via − and ↓ and select the floppy type. The settings are 360 KB 5¼ inch, 1.2 MB 5¼ inch, 720 KB 3½ inch, 1.44 MB 3½ inch, or 2.88 MB 3½ inch.

Primary Master, Primary Slave, Secondary Master, Secondary Slave Select one of these hard disk drive icons to configure the hard disk drive named in the option. Select Auto from the drive parameters screen to let AMIBIOS automatically configure the drive. A screen with a list of drive parameters appears. Click on OK to configure the drive.

Drive Type

How to Configure

 

SCSI

Select Type. Select Not Installed in the drive parameter screen. The SCSI

 

 

 

drivers provided by the SCSI drive or SCSI host adapter manufacturer should

 

 

 

allow you to configure the SCSI drive.

 

IDE

Select Type. Select Auto to let AMIBIOS determine the parameters. Click on

 

 

 

OK when AMIBIOS displays the drive parameters.

 

 

 

Select LBA/Large Mode. Select On if the drive has a capacity greater than

 

 

 

540 MB.

 

 

 

Select Block Mode. Select On to allow block mode data transfers.

 

 

 

Select 32-Bit Transfer. Select On to allow 32-bit data transfers.

 

 

 

Select the PIO Mode. It is best to select Auto to allow AMIBIOS to determine

 

 

 

the PIO mode. If you select a PIO mode that is not supported by the IDE

 

 

 

drive, the drive will not work properly. If you are absolutely certain that you

 

 

 

know the drive’s PIO mode, select PIO mode 0 - 5, as appropriate.

 

CD-ROM

Select Type. Select CDROM. Click on OK when AMIBIOS displays the drive

 

 

 

parameters.

 

Standard

Select Type. You must know the drive parameters. Select the drive type that

 

MFM Drive

exactly matches your drive’s parameters.

 

Non-

Select Type. If the drive parameters do not match the drive parameters listed

 

Standard

for drive types 1 - 46, select User and enter the correct hard disk drive

 

MFM Drive

parameters.

 

 

 

 

 

 

Cont’d

44Apollo IV PCI Pentium ISA Motherboard User’s Guide

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Apollo IV Pentium PCI ISA MotherboardGuide Ii Apollo IV PCI Pentium ISA Motherboard User’s Guide Phone Number Characteristics PrefaceTechnical Support Packing List Static ElectricityOverview CPU Manufacturer Supported CPU SpeedsChipset Type of System Supported System Memory Socket Overview Fast ATA Ultra DMA/33Floppy Parallel PortMouse CPU External Clock Frequency PCI Expansion Slot FrequencyDMI InfraredApollo IV Dimensions Motherboard Height RestrictionsInstallation Steps Step ActionApollo IV Motherboard Layout Unpack the Motherboard Step ActionPWR1 Setting Description Set JumpersAvoid Static Electricity Flash ROM TypeConfigure CPU ExternalFor P54C P55CSummary of Jumper Setting for Intel Pentium CPUs P54CSummary of Jumper Setting for AMD K5 and K6 CPUs Value Description AMD-K6 Step Action Install Memory Supported System Memory ConfigurationsType of System Memory Supported System Memory Socket Total SystemMemory Display Install the Motherboard Should supply these partsInstall Motherboard Connector Attach CablesAttach Cables Power Connector Pinout Pin DescriptionMotherboard PinPin Description Pins 12 13 14 Connector Signal DescriptionsPin Description Signal Description Connect Onboard I/OPin Signal Description SLCTIN#Attach Floppy Drive Floppy Connector Pinout Twist in Floppy CablePin Use Attach IDE Drive Attach IDE Drive Primary Pinout The Primary IDE pinout is Secondary IDE Pinout The Secondary pinout is Test and Configure Page Winbios Setup Using a Mouse with Winbios Setup Using the Keyboard with Winbios SetupKeystroke Action Winbios Setup Menu Standard Setup Drive Type How to ConfigureParameter Description Hard Disk Drive Types 65535 1223 152 MBAdvanced Setup Setting DescriptionAdvanced Setup Type of Armd Device Drive Emulation Configured Advanced Setup Disabled Chipset Setup Power Management Setup Power Management Setup PCI/PnP Setup Cont’dSnoop Bit Action Option Optimal Default Fail-Safe Default DMA ChannelPeripheral Setup Primary PrefetchIDE Secondary IRQ options Offboard PCI IDE Primary IRQPeripheral Setup Setting Description EPP VersionAmibios Password Support SecuritySetting a Password Changing a PasswordAnti-Virus Utility Original OptimalFail-Safe Programming the Flash ROM Programming the Flash EpromProgramming the Flash ROM Step Expected behaviorNumber of Beeps Description Bootblock Code Checkpoint Codes Code Description
Top Page Image Contents