Installing and Configuring the Edge Switch 2/32
Configure Date and Time
Perform this procedure to configure the effective date and time for the switch. To set the date and time:
1.At the Configure window, click the Switch tab, then select Date/Time tab. The Switch page displays with Date/Time tab selected (highlighted red), as shown in Figure
Figure 2–41: Switch page—Date/Time tab
a.Click the Date fields that require change, and type numbers in the following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b.Click the Time fields that require change, and type numbers in the following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
2.Click Activate to save the information. The message Your changes to the date/time configuration have been successfully activated displays.
edge switch 2/32 installation guide |
