Installing and Configuring the Edge Switch 2/32

•Active = Saved—when this option is enabled, the active configuration of logical port addresses is used when the IPL configuration file is updated. If a check mark displays, the Active = Saved option is enabled.

3.Select the appropriate country code page from the following Code Page list box, as shown in Table 2–3.

Table 2–3: Code Page Choices

 

Code

Code Page Name

Page

 

 

United

00037

States/Canada

 

 

 

Germany/Austria

00273

 

 

Brazil

00275

 

 

Italy

00280

 

 

Japan

00281

 

 

Spain/Latin

00284

America

 

 

 

United Kingdom

00285

 

 

France

00297

 

 

International #5

00500

 

 

4. Click Activate to enable changes and allow or prohibit FICON host control.

Task 11: Set Switch Date and Time

The Edge Switch 2/32 Product Manager log entries are stamped with the date and time received from the switch. To set the effective date and time for the switch:

1.At the Hardware View page for the selected switch, choose Configure > Date/Time. The Configure Date and Time dialog box displays, as shown in Figure 2–17.

The switch date and time can be set manually, or set to be periodically updated by the HAFM application (the switch and HAFM application synchronize at least once daily).