Regulatory Compliance Notices
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or television technician for help.
Declaration of Conformity for Products Marked with FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For questions regarding your product, refer to http://thenew.hp.com.
For questions regarding this FCC declaration, contact:
Product Regulations Manager
3000 Hanover St.
Palo Alto, CA 94304
Or call
To identify this product, refer to the part, Regulatory Model Number, or product number found on the product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by
Network and Serial Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
