HP 958-000290-000, AA-RSTZB-TE manual Optional Kits, Ethernet Hub

Introduction

Although a configured switch operates normally without HAFM server intervention, an attached server should operate at all times to monitor switch operation, log events and configuration changes, and report failures.

The HAFM server provides an auto-detecting 10/100 Mbps LAN connection, provided by an internal Ethernet adapter card. This LAN port attaches to the customer’s public intranet to allow access from remote user workstations. An optional Ethernet adapter card (not supplied by HP) can be installed in the personal computer memory card international association (PCMCIA) slot to provide a connection to a private LAN segment for dedicated director communication.

Ethernet Hub

The HAFM server and managed directors connect through a rack-mounted 10/100 Base-T Ethernet hub. Figure 1–5illustrates the optional 12-port hub.

ProCurve 10/100	Hub 12
HP J3294A

Power

Fault

1	2	3	4	5	6
7	8	9	10	11	12

Reset

Link

100

Link

100

Act Col

	Port 1 Only
MDI-X	MDI
(out)	(in)

1	2X	3X	4X
				5X	6X
7X	8X	9X	10X
				11X	12X

Figure 1–5: 12-Port Ethernet hub

Optional Kits

Contact your HP authorized service provider to purchase the following optional edge switch 2/32 kits. See Table 1–1.

Table 1–1: Edge switch 2/32 Optional Kits

Supporting Kit	Description
8-flexport upgrade for Edge Switch	Used to upgrade from 16 to 24 and 24
2/32,	to 32 ports.
Part Number: DS-DM8PU-AA /
302660-B21
2/32 Product Manager license,	Used when switch is managed through
Part Number: QM-6YCAA-AA /	HAFM.
300658-B21

edge switch 2/32 installation guide 1–11