Installing and Configuring the Edge Switch 2/32
6.Click Next when you are done. A Modify Threshold screen displays where you can change the % utilization, cumulative minutes for the threshold to occur before notification, and the time interval for measuring throughput and for alert notification.
7.Make appropriate changes, then continue through the Modify Threshold screens, making changes as necessary, until the summary screen displays showing the alert configuration.
8.Perform either of the following steps:
•If you need to change any parameters, select Previous and Next to display the desired Modify Threshold screen.
•Select Finish when you are done.
Activate or Deactivate Alerts
Use the following steps to activate or deactivate existing threshold alerts. In the active state, notifications are generated for the alert. In the inactive state, notifications do not occur.
1.Choose Configure > Threshold Alerts. The Configure Threshold Alerts dialog box displays. The port’s current state, deactive or active, is listed under the State column.
2.To change the state, select the alert information in the table.
•If the alert is active, click Deactivate to change to the deactive state.
•If the alert is deactive, click Activate to change to the active state.
Delete Alerts
Use the following steps to delete existing threshold alerts.
1.Choose Configure > Threshold Alerts. The Configure Threshold Alerts dialog box displays.
2.Select the alert that you want to delete by selecting the alert information in the table.
3.Click Delete. A message displays asking you to confirm the deletion.
4.Click Yes. The alert is removed from the dialog box.
edge switch 2/32 installation guide |
