Installing and Configuring the Edge Switch 2/32

7. Type the default user name and password.

NOTE: The default user name is Administrator and the default password is password. The user name and password are case-sensitive.

8.Click OK. The Embedded Web Server interface opens with the View window displayed.

Configure SNMP Trap Message Recipients

Perform this procedure to configure community names, write authorizations, and network addresses and for up to 6 SNMP trap message recipients. A trap recipient is a management workstation that receives notification (through SNMP) if a switch event occurs.

To configure SNMP trap recipients:

1.Choose Configure at the left side of the window. The Configure window opens with the Ports tab displayed.

2.At the Configure window, click the Management tab. The Management page displays with SNMP tab selected, as shown in Figure 2–46.