Installing and Configuring the Edge Switch 2/32

2.To enable transmission of trap messages to configured SNMP management workstations, click Enable Authorization Traps. A check mark displays in the box when transmission is enabled, as shown in Figure 2–27.

Figure 2–27: Configure SNMP dialog box—Enable Authorization Traps

3. Click Activate to save the information and close the dialog box.

Configure and Enable E-mail Notification

Perform this procedure to configure and enable e-mail addresses and simple mail transfer protocol (SMTP) server addresses to receive e-mail notification of switch (and other managed product) events. The addresses must be configured at the HAFM application, then enabled. See “Task 13: Test Remote Notification (Optional)” on page 2–50for instructions on testing this notification feature.

To configure and enable e-mail and SMTP server addresses:

1.At the Product View page, choose Maintenance > Configure E-Mail. The Configure E-Mail dialog box displays, as shown in Figure 2–28.