Installing and Configuring the Edge Switch 2/32

Task 6: Configure the Switch to the HAFM Application

To manage a new switch, it must be identified to the HAFM application. To identify the new switch:

1.Right-click in a blank area of the Product View page and select New or click Product on the menu bar and choose New. The New Product dialog box displays, as shown in Figure 2–7.

Figure 2–7: New Product dialog box

2.Type the IP address or DNS host name of the switch (determined by the customer’s network administrator).

3.Select edge-32from the Product Type field and click OK. A new switch icon displays at the Product View page.

4.Repeat step 1 through step 3 for each new switch.

Task 7: Record or Verify HAFM Server Restore Information

Configuration information must be recorded to restore the HAFM server in case of hard drive failure. The Windows 2000 operating system and the HAFM and Edge Switch 2/32 Product Manager application must also be restored. Refer to the hp StorageWorks edge switch 2/32 service manual for instructions.

To record or verify HAFM server configuration information refer to the hp StorageWorks HAFM server installation guide for instructions.