HP 958-000290-000, AA-RSTZB-TE manual Switch page-Network tab

Installing and Configuring the Edge Switch 2/32

Figure 2–44: Switch page—Network tab

a.At the IP Address field, type the new value as specified by the customer’s network administrator (default is 10.1.1.10, factory preset is 10.1.1.10).

b.At the Subnet Mask field, type the new value as specified by the customer’s network administrator (default is 255.0.0.0).

c.At the Gateway Address field, type the new value as specified by the customer’s network administrator (default is 0.0.0.0).

edge switch 2/32 installation guide 2-63