Installing and Configuring the Edge Switch 2/32
Procedures
Use the following procedures to create a new threshold alert, or to modify, activate, deactivate, or delete an alert.
Create New Alert
1.At the Hardware View for the selected switch, choose Configure > Threshold Alerts. The Configure Threshold Alerts dialog box displays, as shown in Figure
If alerts are configured, they will display in table format showing the name of the alert, type of alert (Rx, TX, or Rx or Tx), and alert state (inactive or active).
Figure 2–29: Configure Threshold Alerts dialog box
edge switch 2/32 installation guide |
