Installing and Configuring the Edge Switch 2/32

Figure 2–17: Configure Date and Time dialog box

Set Date and Time Manually

To set the switch date and time manually:

1.At the Configure Date and Time dialog box, click Periodic Date/Time Synchronization to deselect the option (no check mark in the box). The greyed out Date and Time fields activate.

2.Click the Date fields that require change, and type numbers in the following ranges:

Month (MM): 1 through 12

Day (DD): 1 through 31

Year (YY): greater than 1980

3.Click the Time fields that require change, and type numbers in the following ranges:

Hour (HH): 0 through 23

Minute (MM): 0 through 59

Second (SS): 0 through 59

4.Click Activate to set the switch date and time and close the Configure Date and Time dialog box.