Installing and Configuring the Edge Switch 2/32

11.Click Next. A final screen displays to provide a summary of your alert configuration. To make any changes, backwards and forwards through the configuration screens by selecting Previous and Next, as shown in Figure 2–33.

Figure 2–33: New Threshold Alerts dialog box—summary screen

12.Select Finish. The Configure Threshold Alerts dialog box displays listing the name, type, and state of the alert that you just configured.

At this point, the alert is not active. To activate the alert, select the alert information that displays in the Configure Threshold Alerts table and select Activate, as shown in Figure 2–34.