Installing and Configuring the Edge Switch 2/32

Figure 2–8: Switch Hardware View page

4.Inspect switch status at the Hardware View page and perform one of the following steps:

a.If the switch displays operational (no FRU alert symbols and a green circle at the alert panel), go to “Task 11: Set Switch Date and Time” on page 2–21.

b.If switch operation displays degraded or a switch failure is indicated (FRU alert symbols and a yellow triangle or red diamond at the alert panel), refer to the hp StorageWorks edge switch 2/32 service manual to isolate the problem.

Task 9: Configure Feature Key (Optional)

Perform this task to display or install operating features that are available as customer-specified options. Available features include the:

•Open systems management server (OSMS)