Installing and Configuring the Edge Switch 2/32
Figure 2–40: Switch page—Identification tab
a.Type a switch name of 24 alphanumeric characters or less in the Name field. Each switch should be configured with a unique name.
If the switch is installed on a public LAN, the name should reflect the switch’s Ethernet network DNS host name. For example, if the DNS host name is hpes232.hp.com, then enter hpes232.
b.Type a switch description of 255 alphanumeric characters or less in the Description field.
c.Type the switch physical location (255 alphanumeric characters or less) in the Location field.
d.Type the name of a contact person (255 alphanumeric characters or less) in the Contact field.
2.Click Activate to save the information. The message Your changes to the identification configuration have been successfully activated displays.
edge switch 2/32 installation guide |
