Terminal Setup
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
From the Edit Options Menu,
•Press 1 for Edit Mobile Unit IP (edit IP for terminal).
•Press 2 for Edit Server/Host list (Edit IP and port for server).
•Press 3 for Edit License Key (to authorize the terminal.
•Press 4 for Switch Client Modes (switches to server/thin mode).
•Press 5 for Run Client Emulator (runs emulation program).
•Press 6 for Exit to OS (shuts down the terminal).
Authorizing PowerNet
Each PowerNet Twin Client will run for 30 minutes at a time without authorization. Uninterrupted operation for a production environment is the result of authorizing the software.
The Twin Client Manager can automatically authorize the terminal over the wireless network if the following requirements are met:
•A PC running Twin Client Manager is connected to the wire LAN segment with at least one access point within range of the terminal.
•The System ID of the PC on which Twin Client Manager is installed has been used to obtain a site license Authorization code from the Connect web site.
To obtain the System ID of the Twin Client Manager, click on the Authorization option in the Tools menu, as shown below.
The Authorization window is displayed as shown below.
Supported Equipment Manual • March, 2006 |