Denso BHT-7500, BHT-103 manual Press 3 Linkup Time and move cursor to

Terminal Setup

SET PROTOCOLS

<OPTICAL>

1: SERIAL NO. ON OFF

2: H. PARITY ON OFF

3:LINKUP TIME

NONE 30 60 90 120

4:FIELD SPACE IGNORE DATA

When the settings have been recorded, press Enter. This will return the terminal to the Set Communication Menu.

SET COMMUNICATION

1:PARAMETER

2:PROTCOL

Press 1 and Enter, and cursor to 115,200.

SET PARAMETER <OPTICAL>

1:TRANSMIT SPEED 2400 9600 19200

38400 57600 115200

Press <C> to return to the Set Communication Menu. Press 2: <Connector> and Enter.

SET COMMUNICATION

1:OPTICAL

2:CONNECTOR

3:COM PORT

4:PROTOCOL TYPE

Press 1 or move cursor to the <Serial No.> field and move cursor to <On>. Press 2: <H. Parity> and move cursor to <On>.

Press 3: <Linkup Time> and move cursor to <30>.

Press 4: <Field Space> and move cursor to <Ignore>.

SET PROTOCOL <CONNECTOR>

1: SERIAL NO. ON OFF

2: H. PARITY ON OFF

3: LINKUP TIME

NONE 30 60 90 120

4:FIELD SPACE IGNORE DATA

2-10 Supported Equipment Manual • March, 2006