Denso BHT-103, BHT-7500 manual Message, Reason, Solution, Reference Tech Note

Page 59
Manual background

Error Message Resolution Guide

Message

Reason

Solution

Reference Tech Note

Connection ERROR.\nREBOOT

Could not Connect.

MOBILE UNIT;

 

Disconnect ERROR.\nREBOOT

Could not Disconnect.

MOBILE UNIT;

 

RF Send ERROR.\nREBOOT MOBILE Could not Send. UNIT;

RF Receive ERROR.\nREBOOT

Could not Receive.

MOBILE UNIT;

 

RF Check ERROR.\nREBOOT

Could not run the RF Survey.

MOBILE UNIT;

 

RF Timeout ERROR.\nREBOOT

Have been trying to contact the

MOBILE UNIT;

host for the radio timeout period (2

 

minutes default).

REBOOT MOBILE UNIT;

Reboot the Mobile Unit do to loss

 

of connection.

Verify that your Network settings are

T1113, T1114, T1161,

correct and you are in the correct mode

T1171, T1187 and

using the correct Port.

T1194

Verify that your Network settings are

T1113, T1114, T1161,

correct and you are in the correct mode

T1171, T1187 and

using the correct Port.

T1194

Most likely a range, access point, radio,

T1113, T1114, T1161,

host or network issue. Troubleshoot the

T1171, T1187 and

customer’s environment.

T1194

Most likely a range, access point, radio,

T1113, T1114, T1161,

host or network issue. Troubleshoot the

T1171, T1187 and

customer’s environment.

T1194

Most likely a range, access point, radio,

T1113, T1114, T1161,

host or network issue. Troubleshoot the

T1171, T1187 and

customer’s environment.

T1194

Most likely a range, access point, radio,

T1113, T1114, T1161,

host or network issue. Troubleshoot the

T1171, T1187 and

customer’s environment.

T1194

Most likely a range, access point, radio,

T1113, T1114, T1161,

host or network issue. Troubleshoot the

T1171, T1187 and

customer’s environment.

T1194

Retry (Y/N)?;

Try again.

Try to send or receive again, or perhaps

---

 

 

ensure that the printer is cabled to the

 

 

 

Mobile Unit and is on.

 

Supported Equipment Manual • March, 2006

4-3

Image 59
Contents Supported Equipment Manual Production Copyright 1996 - 2006 by Connect, IncTrademarks Configuring the Terminal for Download Running Setup from a Download FileInstallation………………… This page is intentionally blank Descriptions Chapter 1 IntroductionRelease Notes BHT-7500 BHT-103 PicturesAccessories Setup RequirementsSupported Equipment Manual March Downloading From the WEB Chapter 2 Terminal SetupRunning Setup from a Download File Terminal Setup InstallationThe InstallShield wizard runs and presents the following screen Click on Next to begin the installation processa. To reboot the system immediately, click on Finish Toolbar Running the ManagerMenu Bar Quick Start Configuring the ManagerSetting Terminal Model and COM Port For the purposes of this example, the name is vt220 Saving the ConfigurationClick File and Save As. Enter a name for this configuration Downloading EX3 Files Configuring the Terminal for DownloadConnecting the Cradle Command Mode Safe BootPress 2 H. Parity and move cursor to On Press 3 Linkup Time and move cursor to Press 1 for Basic Mode settings, and cursor to Optical The following screen will appear Choose OK at the prompt above Errors in System Mode 2-14 DOWNLOAD FILE OUT OF MEMORY RETRY? 1. YES 2. NOThe current download will exceed the maximum of 80 files in the memory 7 FTP 8 RF Setting the Default ExecutableTwin Client 1991-2006, Connect, Inc Keypress to Continue 1 EXECUTE PROGRAM 2 DOWNLOAD 3 UPLOAD 4 SET SYSTEM 5 TEST 6 VERSIONStarting a Telnet Session Setup Using Twin Client Manager Standard SetupHard is the same as Soft except the viewing keys are disabled 5250 Settings Hard is the same as Soft except the viewing keys are disabled 3270 Settings Hard is the same as Soft except the viewing keys are disabled Edit Server/Host IPs Terminal Setup Using Twin Client MenusEdit Mobile Unit IP Run Site Survey Switch Client ModesSetting Default Executable Edit License KeyAuthorizing PowerNet Authorized Terminals Add Licenses Enter the additional license’s authorization code and click on OK Transfer Authorization Click on OK when finished Click on the Close button when finished ListingClick on the Listing button to view authorization codes issued Codabar Start/Stop Number Chapter 3 Keypad Configuration Keypad Configuration BHT-7500Keypad Figures F5 x ‘ VT KeyboardKeytop BHT-7500sreq 3270 Keyboard5250 Keyboard Keypad Table Supported Equipment Manual March right parenthesis BHT-103 BHT-103M1 M2 7 8 4 5 1 2 BS C SF PWlowercase character screen uppercase character screenF9-F16 screen Note The 8 keys above are specific to 5250 emulation 5250 emulation3270 emulation VT emulationSupported Equipment Manual March 3-14 Down Left Up Right 3-16 Reference Tech Note Chapter 4 Error Message Resolution GuideMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage ReasonReference Tech Note SolutionMessage Reason