Graco important safety instructions 15V534 Gun Flush Box Interface Kit

Page 1

Instructions-Parts

15V534 Gun Flush

 

Box Interface Kit

ENG

 

313212A

 

 

Interfaces a Graco Gun Flush Box with a ProMix® 2KS Electronic Proportioner using a RoboMix Fluid Station. For professional use only.

Approved for use in explosive atmospheres only when used in conjunction with ProMix 2KS Electronic Proportioners.

100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure

Important Safety Instructions

Read all warnings and instructions in this manual. For complete warnings and instructions see your proportioning system manual and gun flush box manual 312784. Hazard symbols refer to spe- cific procedure risks. Save all instructions.

GFB Interface Kit shown with two air flow switches installed

TI14275a

0359

II 2 G

#

53

Image 1
Contents 15V534 Gun Flush Box Interface Kit Related Manuals ContentsOverview Location InstallationMount the Enclosure Connect Cable to Terminal Strip Install the CableAFS#2 Install the Air Flow SwitchInstall Pressure Switch two shown Install the Pressure SwitchInstall Solenoid two shown Install the SolenoidRoboMix Control Board J1 Connections Connect the Cable to the RoboMix Control BoardGround the Enclosure Connect the Gun Flush Box Replace the CoverConnect Air Supply to Module Installation 12 Ref PartsConnect a Booth Control to the RoboMix Technical Data DimensionsGraco Information Graco Standard Warranty