Graco 15V534 Install the Pressure Switch, Install Pressure Switch two shown

Installation

Install the Pressure Switch

NOTE: The GFB Interface Module Kit does not include a pressure switch (PS). The pressure switch is supplied with the gun flush box kit. Install the pressure switch in the interface module as follows.

1.Each gun flush box kit includes one pressure switch (PS). The GFB interface module can accommodate 1 or 2 pressure switches. Install the switch(es) in the left side of the enclosure. See FIG. 5.

1 Pressure switch is part of gun flush box kit; not included with GFB Interface Kit.

1PS#1

PS#2

1

TI14282a

FIG. 5. Install Pressure Switch (two shown)

2.Connect the wires from PS#1 to the right side of the terminal strip (12) pins 5 (+) & 6 (-), as indicated by the label (21). See FIG. 6 and Table 1.

12 21

TI14279a

FIG. 6. Connect Pressure Switch to Terminal Strip

3.If using a second gun flush box, connect the wires from PS#2 to the right side of the terminal strip (12) pins 7 (+) & 8 (-), as indicated by the label (21). See FIG. 6 and Table 1.

6 313212A