Hand Held Products manual Using the QC890 Verifier with Bluetooth Devices

Page 12

Using the QC890 Verifier with Bluetooth Devices

Note: If you chose to use the USB or RS-232 interfaces, the Bluetooth communication interface automatically turns off.

The QC890 Verifier may be used with Bluetooth devices (e.g., laptop, PC, PDA, etc.). Scanning the Bluetooth bar code below turns the Bluetooth option on in the QC890 Verifier. Default = Off.

Bluetooth On

Note: If you turn the Bluetooth option on, scan the appropriate bar code that follows to connect to a PC/Laptop or PDA/Mobility Systems device.

To establish a Bluetooth connection to a PC/Laptop, scan the bar code below, follow the instructions supplied with your Bluetooth device to locate the QC890 Verifier, and connect to it. If you go out of range with your QC890 Verifier, the QC890 Verifier automatically reconnects to the Bluetooth device once you come back in range. When Bluetooth communication is enabled, the default is PC/ Laptop.

* Bluetooth Connection - PC/Laptop

To establish a Bluetooth connection to a PDA or Hand Held Products Mobility Systems device, scan the bar code below, follow the instructions supplied with your Bluetooth device to locate the QC890 Verifier, and connect to it. If you go out of range with your QC890 Verifier, the QC890 Verifier will not re-connect. It will be up to the host device to re-connect to the QC890 Verifier.

Bluetooth Connection - PDA/Mobility Systems Device

2 - 4

Quick Check® 890 User’s Guide

Image 12
Contents User’s Guide Disclaimer Table of Contents Maintenance QC890 Verifier Features Getting StartedIntroduction Unpacking the QC890 VerifierUsing the QC890 Verifier Scan ButtonScan Button LEDs Special Features Physical ConnectionsUser LED Indications Audio SoundSpecifications Internal BatteryCharging the Battery Powering On the QC890 VerifierInstallation of Quick Check ImageData Quick Check ImageDataQuick Check ImageData Communication InterfacesUSB COM Port Emulation Bluetooth RS-232 Serial Communication InterfaceRS-232 Selections Using the QC890 Verifier with Bluetooth Devices Enabling Your Device for Bluetooth Quick Check 890 User’s Guide Enabling Qcid for Bluetooth Using Quick Check ImageData Help System Quick Check 890 User’s Guide Scanning a Bar Code Symbol Using the QC890 Verifier Scanning a Bar Code Symbol Using Quick Check ImageDataCalibrating the QC890 Verifier Scanning Properly Using a Pen/Mouse Wand Calibrating an External Pen/Mouse Wand Scanning Properly Using the QC3800V Linear Imager Calibration Log Reflectometer Mode Quick Check 890 User’s Guide Maintenance Cleaning the External DevicesQC890 Verifier RecertificationQuick Check 890 User’s Guide Product Service and Repair Customer SupportOnline Product Service and Repair Assistance Technical AssistanceLimited Warranty Online Technical AssistanceQuick Check 890 User’s Guide Apertures Pen/Mouse Wand Aperture SelectionQuick Check 890 User’s Guide Menu Setting Bar Codes Resetting the Standard Product DefaultsIllumination Timer Power Down TimerQuick Check 890 User’s Guide Symbology Defaults Operation Code Regular 2 Telepen UPC/EAN Iata 2 UnrecognizedQuick Check 890 User’s Guide Page Hand Held Products, Inc