Hand Held Products 890 manual Specifications, Internal Battery, Charging the Battery

Page 8

Specifications

Item

Specification

 

 

Dimensions

7” (18cm)W x 6”(15.cm)H x 5.4” (14cm)D

 

 

Weight

1 lb 8 oz (680 grams)

 

 

Temperature

Storage: -20° to 70°C

 

Operational: 0° to 50°C

 

 

Humidity

20% to 95% RH non condensing

 

 

Battery

Built-in factory - Lithium Ion rechargeable

 

 

Internal Battery

Note: Batteries are factory replaceable only. You must return your unit to Hand Held Products for replacement (see Product Service and Repair on page 5-1).

Charging the Battery

Note: The battery may be in an unknown charge state at delivery. We recommend that you charge the battery for at least 6 hours prior to use. You may use the while charging it.

To charge the batteries:

1.Plug the power supply into the port on the back of the unit.

2.Plug in the power supply to the AC main source.

The QC890 Verifier uses a rechargeable battery. The QC890 Verifier can be operated from the battery or power supply. With a set of properly charged batteries, the unit operates for a minimum of 20 hours. When not in use, you can leave the unit connected to the charger.

Powering On the QC890 Verifier

•If the power supply is attached and plugged into a wall outlet, the QC890 Verifier is on.

•If the QC890 Verifier is attached to the USB host with power on, the verifier is on.

•If the QC890 Verifier is operating using the battery, it shuts itself off after 15 minutes of inactivity to conserve battery power. Pressing the scan button on top of the unit one time powers up the unit from the power down mode.

1 - 4

Quick Check® 890 User’s Guide

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User’s Guide Disclaimer Table of Contents Maintenance QC890 Verifier Features Getting StartedIntroduction Unpacking the QC890 VerifierScan Button LEDs Using the QC890 VerifierScan Button Special Features Physical ConnectionsUser LED Indications Audio SoundSpecifications Internal BatteryCharging the Battery Powering On the QC890 VerifierInstallation of Quick Check ImageData Quick Check ImageDataQuick Check ImageData Communication InterfacesUSB COM Port Emulation RS-232 Selections BluetoothRS-232 Serial Communication Interface Using the QC890 Verifier with Bluetooth Devices Enabling Your Device for Bluetooth Quick Check 890 User’s Guide Enabling Qcid for Bluetooth Using Quick Check ImageData Help System Quick Check 890 User’s Guide Scanning a Bar Code Symbol Using the QC890 Verifier Scanning a Bar Code Symbol Using Quick Check ImageDataCalibrating the QC890 Verifier Scanning Properly Using a Pen/Mouse Wand Calibrating an External Pen/Mouse Wand Scanning Properly Using the QC3800V Linear Imager Calibration Log Reflectometer Mode Quick Check 890 User’s Guide Maintenance Cleaning the External DevicesQC890 Verifier RecertificationQuick Check 890 User’s Guide Product Service and Repair Customer SupportOnline Product Service and Repair Assistance Technical AssistanceLimited Warranty Online Technical AssistanceQuick Check 890 User’s Guide Apertures Pen/Mouse Wand Aperture SelectionQuick Check 890 User’s Guide Menu Setting Bar Codes Resetting the Standard Product DefaultsIllumination Timer Power Down TimerQuick Check 890 User’s Guide Symbology Defaults Operation Code Regular 2 Telepen UPC/EAN Iata 2 UnrecognizedQuick Check 890 User’s Guide Page Hand Held Products, Inc
Top Page Image Contents