Hand Held Products 890 manual Menu Setting Bar Codes, Resetting the Standard Product Defaults

B

Menu Setting Bar Codes

The QC890 bar code verifiers are programmed in the factory for the most common settings. If you need to change these settings, programming is accomplished by scanning the bar codes included in this chapter.

An asterisk (*) next to an option indicates the default setting.

Resetting the Standard Product Defaults

If you aren’t sure what programming options are in your device, or you’ve changed some options and want the factory settings restored, scan the Standard Product Default Settings bar code below.

Standard Product Default Settings

Illumination Timer

Scan the appropriate bar code to set the duration (in seconds) of the illumination. Default = 5 seconds.

3 seconds

*5 seconds

15 seconds

Power Down Timer

Note: This option applies to battery operation only.

When there is no activity within a specified time period, the QC890 Verifier enters low power mode. Scan the appropriate Power Time-Out bar code to change the time-out duration (in seconds).

Note: Scanning zero (0) is the equivalent of setting no time-out.

Quick Check® 890 User’s Guide B - 1