Freestyle 65 User Guide ~ 5th Edition ~ 5th April ’02 ~ 3950

To switch the answering

To adjust the base unit

machine ON/OFF

loudspeaker volume

Press and release the ANSWER ON/OFF button to

switch ON or OFF.

If you hear “Answer on, your outgoing message is....”

the answering machine is switched on and is ready to answer incoming calls and record any messages, unless Answer Only is selected which is an advisory announcement only, so that the machine will not record an incoming message.

The display on the base unit shows the number of messages stored in the memory.

If you hear “Answer off” the answering machine is switched off.

The display on the base unit will flash between a dash and the number of messages saved in the memory.

The loudspeaker volume ranges from 0-9 plus H, where 0 is Off and H is the maximum level. The default level is 5.

Press VOL + on the base to increase the volume.

Press VOL - on the base to decrease the volume.

If you adjust the volume when the answering machine is not being used, a beep sounds at each press. When the volume reaches its highest or lowest levels two beeps will sound.

Answer delay

Answer delay sets the number of times your Freestyle 65 will ring before the answer machine picks up your call and starts playing the outgoing message. The default setting is for the answering machine to answer after 6 rings. You can change this setting to between 2-9 rings.

18

Page 21
Image 21
BT Freestyle 65 manual Answer delay, To switch the answering, Machine ON/OFF Loudspeaker volume, To adjust the base unit