Freestyle 65 User Guide ~ 5th Edition ~ 5th April ’02 ~ 3950

Wall mounting

Your Freestyle 65 can be wall-mounted by removing the desk bracket.

To remove, just squeeze the bracket in with thumbs and lift off as shown.

Please refer to page 48, wall-mounting template.

Note

Before you wall-mount your

Freestyle 65, check that:

the wall can support the weight of the base unit and handset;

you are not drilling into any hidden wiring or pipework;

the power supply cable will reach from the mains power socket to your wall mounting position;

the position you choose leaves enough space so that the base unit is clear of any obstruction on the wall, such as a shelf or cupboard. Room should be left so that the handset can be placed on charge without touching any obstructions.

For the best operating conditions, try to place the base unit away from large metal objects and other electrical appliances.

1Drill 2 holes for the screws and insert the wall-plugs provided (if required).

WALL PLUG

WALL

 

 

7

0 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Drive the screws into the wall, leaving about 4mm free on which to mount the bracket and base unit.

3Make sure that the power supply and the telephone cables are connected to the base unit, then fit the cables into the channels on the bottom of the base unit.

4Attach the base unit by hooking it over the screws protruding from the wall.

44

Page 47
Image 47
BT Freestyle 65 manual Wall mounting