Freestyle 65 User Guide ~ 5th Edition ~ 5th April ’02 ~ 3950

To register an additional handset

Please ensure you have only the handset you wish to register ready when following the instructions below.

Please remove the handset from the base unit to access the PAGE button, which is situated underneath the handset.

Press and hold the base unit PAGE button for approximately 5 seconds until you hear a double confirmation beep and then release the PAGE button. Both the IN USE light on the base unit and the light on

the unregistered handset begin to flash.

Immediately, press the TALK button on the additional handset that you wish to register.

If successful you will hear a long confirmation beep and your additional handset will be registered.

To check that your additional handset is registered correctly, press the TALK button on the handset. The TALK light should remain constantly lit and you will hear a dial tone.

Note

If the additional handset is not registered and there is no dial tone, please try repeating the steps again. Please ensure that you are registering the correct handset and that the telephone line cord is plugged in.

To set the handset number

Each additional handset must be assigned an identity number (2, 3 or 4) to be used when transferring calls. Your Freestyle 65 handset is already registered as HANDSET 1. A Freestyle 6 additional handset is pre-set as HANDSET 2. However, further additional handsets can be numbered as they are added.

Press the DIRECTORY button.

S en

Press the SCREEN/MENU

cre

 

 

button.

Menu

Enter the handset number

 

2 - 4

between (2 and 4).

Press the DIRECTORY button. You will hear a beep confirming that the new number has been stored.

Note

Make a note of the handset number by writing it on the directory label on the back of the additional handset.

36

Page 39
Image 39
BT Freestyle 65 manual To register an additional handset, To set the handset number